SsangYong Korando III (2010 year). Manual — part 175
05-35
8010-01
05-36
7) Odometer (ODO) and Trip Meter (TRIP)
The total driving distance (0 to 999,999 km or 0 to 999,999 miles) and the trip distance (0.0 to 999.9 km
or 0.0 to 9,999.9 miles) are calculated by using the value of pulse per 1 km which is programmed in the
EEPROM.
Applicable maximum driving speed is 300 km/h. If the vehicle speed goes over the limit, ODO and Trip
meter does not operate any more and the pointer indicates the maximum km/h (MPH). The pulse count
information is sent from the speed module according to the speed CAN data that matches the speed
frequency.
05-37
8010-01
Function
Signal
Remark
Input data
Speed signal
Display type
4 digits LCD
Display range
A: 0.0 ~ 999.9 km
(mile)
B: 0.0 ~ 9999.9 km
(mile)
Resolution
0.1 km (mile)
Maximum Odo
value
A: 0.0 → 999.9 → 0.0
km
B: 0.0 → 9999.9 →
0.0 km
IGN OFF
Memorize and maintain previous trip distance
Data clear
Supply B+ voltage for the first time
Press and hold mode switch for more than 1 sec.
Maximum Odo
value
If the signal indicating actual vehicle speed above 300 km/h is received, the data is
not accumulated.
Function
Signal
Remark
Input data
Speed signal
Display type
6 digits LCD
Display range
0~999999 km(mile)
Hold
Resolution
1 km (mile)
Maximum Odo
value
If the signal indicating
actual vehicle speed
above 300 km/h is
received, the data is
not accumulated.
STD Class Odometer Display & Data Storage
▶
STD Class Tripmeter Display
▶
<STD>
<SVC>
<STD>
<SVC>
05-38
Function
Signal
Remark
Display type
3 digits LCD
Display range
50 km ~ 999 km
(30 miles ~ 999 miles)
Resolution
1 km (mile)
Display interval
every 1 seconds
(1) DTE (Distance To Empty) Mode
The DTE (distance to empty) function is an estimation on how much further the vehicle can be driven with
the fuel remaining in the tank, based on the previous driving pattern (fuel economy).
8) Display Mode
STD Class Odometer Display & Data Storage
▶
<STD>
<SVC>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст