SsangYong Korando III (2010 year). Manual — part 253
01-9
6810-00
Incar sensor
This sensor detects the inside temperature and
installed in PCB.
Face-Level
(vent mode)
Face/Foot-Level
(bi-level mode)
Foot-Level
(foot mode)
Foot/Defrost-level
(foot/defrost mode)
Defroster switch
Use this switch to remove for or
ice from the windshield. When
choosing this mode, the airflow
direction will be changed to the
windshield and side glasses, the
air conditioner operates
automatically, and fresh air
comes in.
The air flow direction can be controlled by turning the dial.
-
Airflow is changed
automatically according to the
setting temperature.
Fan speed dial
Manual control
Fan speed is manually controlled by
this dial. The increment is 1℃.
Auto control
Fan speed is automatically
controlled by temperature setting.
The blower motor operates in a
stepless mode.
-
-
A/C switch
When pressing this switch,
the air conditioner operates
in manual mode and A/C
ON indicator comes on.
Fan speed dial
▶
Mode dial
▶
01-10
Recirculation switch
Temperature dial
Mode dial
Fan speed dial
A/C switch
2) Manual A/C Control
Fan speed dial
The fan speed can be adjusted
by rotating the switch. To stop
the operation, turn the dial to the
"OFF" position.
The level is adjustable in 7
steps.
A/C switch
When pressing the switch with
the engine running, the A/C
compressor operates and the
indicator comes on. Pressing
the switch again deactivates the
compressor and turns off the
indicator.
Fan speed dial
▶
01-11
6810-00
Face/Foot-Level
(bi-level mode)
Face-Level (vent mode)
Foot-Level (foot mode)
Use this switch to remove fog or ice from
the windshield.
When pressing this switch, the airflow
direction will be changed to windshield
and door glasses, the A/C is operated
automatically and the air source mode is
set to fresh air mode.
Defrost mode
Temperature dial
▶
Mode dial
▶
Recirculation switch
When pressing this switch, the air is
recirculated in the vehicle and the
indicator on the switch comes on.
When pressing it again, the indicator
goes off and the fresh air comes in.
When it's rainy or humid, set this
switch to fresh air mode with the
defroster mode selected to clear the
fogged windshield.
Foot/Defrost-level
(Foot & defrost mode)
Temperature dial
Rotate this dial to adjust the
temperature.
Turning this switch clockwise
(red side) increases the
temperature and
counterclockwise (blue side)
decreases the temperature.
01-12
3. A/C COOLING CYCLE
1) System flow
Condition: Gas/Liquid
Function: Keeps the refrigerant free from moisture by separating/collecting the moisture from it.
-
-
"Compression -> Condensation -> Expansion -> Evaporation"
-
Condition: Liquefied gas/Gas
Function: Cools the air by absorbing the heat from the air around the evaporator.
-
-
Condition: Liquid/Liquefied gas
Function: Performs adiabatic expansion and flow control for easier evaporation.
-
-
Condition: Gas/Liquid
Function: Cools and condenses the refrigerant by using ambient air to liquefy it under high pressure.
-
-
Condition: Gas
Function: Circulates the refrigerant and increases the pressure and temperature for easier
evaporation.
-
-
2) Functions
(2) Condenser
(3) Receiver drier
(4) Expansion valve
(5) Evaporator
(1) Compressor
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст