SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 246
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
40
2E
Circuit Diagram
Specifications
Specifications
Rated voltage
Test voltage
Operating voltage range
Minimum operating voltage
Insulating voltage
Restraint test
Surrounding voltage range
Rated voltage
Operating voltage range
Operating temperature range
Reserving temperature range
Insulating voltage
Voltage drop
Test voltage
Acceptable load current
Torque
Voltage
Descriptions
Motor
Control
DC 12 V ± 0.3 V
DC 13.5 V ± 0.3 V
DC 10 ~ 15 V
Below DC 8 V
Over 1 m
Ω
Over 1.1 Km
Below 14 A
-40°C ~ +80°C
DC 12 V
DC 9 ~ 16 V
-30°C ~ +80°C
-40°C ~ +90°C
Over 1 m
Ω
Below 0.5 V
(terminals between 5-7, 6-8, 5-8, 6-7 @ 5 A)
14.0 ± 0.5 A
Maximum 10 A
Voltage
controller
Relay 1
Relay 2
Wiper motor
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
41
2E
Wiper blade
Wiper linkage
Wiper motor
2. REMOVAL AND INSTALLATION OF WIPER ASSEMBLY
1. Front Wiper Assembly
Preceding work: Disconnection of negative battery cable
Components Locator
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
42
2E
1. Detach the washer hose
, unscrew the nut
and remove the wiper blade assembly, and remove the hood cowl
grille.
2. Unscrew the bolts
and remove the wiper linkage assembly.
A. Wiper blade assembly
B. Cowl grill
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
SWITCH
STAVIC - 2004.09
43
2E
3. Disconnect B motor connector
. Unscrew two mounting bolts and two nuts and remove the wiper motor.
4. Install in the reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст