SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 10
1B-19
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
Removal & Installation Procedure
1. Remove the belt tensioning pulley.
Installation Notice
3. Unscrew the bolts and remove the steering pump.
Installation Notice
2. Disconnect the hydraulic pipe of the power steering pump
and drain the oil.
4. Remove the compressor after disconnecting the wiring
connector and refrigerant pipe of A/C compressor.
Notice
Discharge all the refrigerant before removing the
pipes.
Pull the tensioning pulley clockwise as shown in the
figure.
Tightening torque
40.5 ~ 49.5 Nm
(29.9 ~ 36.5 lb-ft)
Tightening torque
22.5 ~ 27.5 Nm
(16.6 ~ 20.3 lb-ft)
1B-20
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
6. Unscrew all the mounting bolts and remove the
A/C bracket and the gasket.
Installation Notice
5. Disconnect the vent hose from the A/C bracket.
Installation Notice
7. Clean the sealing surface.
8. Replace the gasket with new one.
9. Installation should follow the removal procedure in the
reverse order.
10. Check the oil leakage by operating the engine after
installation.
Tightening torque
20 ~ 30 Nm
(15 ~ 22 lb-ft)
Tightening torque
22.5 ~ 27.5 Nm
(16.6 ~ 20.3 lb-ft)
1B-21
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
ENGINE MOUNT
1B-22
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
ENGINE MECHANICAL
M162 GSL ENG SM - 2005.7
Removal and Installation Procedure
1. Unscrew the upper engine mounting nut.
Installation Notice
2. Unscrew the lower engine mounting nut.
Installation Notice
3. Remove the hydraulic engine mounting insulator.
Notice
If the insulator is spotted with oil, replace the
hydraulic insulator asseambly.
4. Installation should follow the removal procedure in the
reverse order.
Tightening torque
70 Nm (52 lb-ft)
Tightening torque
38 Nm (28 lb-ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст