SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 385
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
16
4G
9. Leave marks on the column shaft and lower shaft.
10. Unscrew the column shaft upper mounting bolts(A) and lower shaft mounting bolt.
11. Remove the steering column shaft from lower shaft.
Column shaft upper mounting bolts (2-EA)
Column shaft upper mounting bolts (4-EA)
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
17
4G
12. Unscrew the lower shaft housing floor mounting bolt(A) and lower shaft mounting bolt on the steering gear box.
13. Install in the reverse order of removal.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
18
4G
3. STEERING GEAR BOX
Preceding Work
1. Install the safety wedge under both rear wheels
Because the weight balance move to rear when the sub
frame is removed, safe working condition must be
prepaired.
For this reason, Installing the safety jack to both under
body is important to avoid unexpectable accident.
(The height of safty jack to both side must be same)
The supplement lift is used when you remove or install the sub frame
(Keep in mind the center of gravity of sub frame locate near front axle mounting point)
Front
Rear
16.5 cm
(Put the shifting lever in “P” position and apply the parking brake)
2. Additional safety jack
3. The mounting location of suplement lift
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
19
4G
4. Remove the engine lnsulating brackets from the front sub frame as the
engine hung by an additional lift (crane)
5. Install the engine mounting bracket
Before removal of sub frame, install the special tool (Engine mounting
brackets) on the body frame
RH
LH
RH
LH
RH
Part number : A9912 008 2B
Engine mounting
brackets on the body
Engine insulating
brackets on the sub frame
LH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст