SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 384
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
12
4G
Steering column mounting bolt
Steering wheel and column shaft lock nut
Airbag module mounting bolt
Steering column and lower shaft mounting bolt
Steering gear box and sub frame mounting bolt
Steering box and lower shaft mounting bolt
Tie rod end nuckle
Tie rod end lock nut
Steering gear box and high pressure pipe
Steering gear box and return(Low pressure) line
Power pump bracket and timing gear case cover
mounting bolt
Power pump and high pressure pipe
Return line and mounting bolt
Power steering column
shaft
Item
2.0 ~ 2.5
4.0 ~ 6.1
0.7 ~ 1.1
1.8 ~ 2.5
7.0 ~ 9.0
1.8 ~ 2.5
3.5 ~ 4.5
6.5 ~ 8.0
1.2 ~ 1.8
1.2 ~ 1.8
2.0 ~ 2.3
4.0 ~ 5.0
1.2 ~ 1.8
Kgf
xxxxxm
Tightening Torque
20 ~ 25
40 ~ 60
7.0 ~ 11
18 ~ 25
70 ~ 90
18 ~ 25
35 ~ 45
65 ~ 80
12 ~ 18
12 ~ 18
20 ~ 23
40 ~ 50
12 ~ 18
N
xxxxxm
Power steering gear
box
Power steering pump
Power steering oil pipe
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
13
4G
2. COLUMN SHAFT AND LOWER SHAFT
1. Disconnect the battery negative cable and place the tires to straight ahead direction.
2. Unscrew the screws at both sides of steering wheel and remove the horn pad (air bag module). Disconnect the
airbag module connector.
3. Unscrew the steering wheel lock nut and remove the wheel with special tool.
[Notice]
Leave marks on the column shaft and steering wheel for
correct installation.
4. Remove the instrument lower panel and disconnect all related connectors.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
14
4G
5. Unscrew the steering column cover bolts and remove it.
6. Disconnect five connectors in the cover.
1. Key switch connector
2. Key hole lamp connector
3. Contact coil connector
4. Airbag connector
5. Steering wheel angle sensor
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
POWER STEERING
STAVIC - 2004.09
15
4G
7. Unscrew the contact coil mounting screw and remove it from multi function switch.
8. Disconnect both left and right connectors of multi function switch and unscrew the multi function switch mounting
bolt to disassemble from steering column.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст