SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 373
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
3
REAR SUSP & AXLE
STAVIC - 2004.09
4F
Rear View
Rear Axle & Axle Shaft
Axle mounting
Rear brake cable
Axle shaft
Spring link
Rear axle
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
4
REAR SUSP & AXLE
STAVIC - 2004.09
4F
2. SPECIFICATION
K=120 kgf/mn
Ø14
0.04° ± 0.08°
-1.0° ± 0.5°
Coil spring
Torsion bar
Toe-in
Camber
Suspension type
Spring type
Shock absorber type
Stabilizer type
Wheel alignment
Diameter (Axle) (mm)
Gear ration
Weight (kg)
Length (mn)
Oil capacity ( )
Specified oil
Ø 230
40
250.43
1.7
TOTAL-ISU EP- B85W-90
37
11
41
3.9
11
43
4.1
9
37
4.3
11
47
4.6
9
41
4.9
9
44
5.4
8
43
5.9
7
41
Number of tooth
Pinion
Gear
Multi-link
Gas
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
5
REAR SUSP & AXLE
STAVIC - 2004.09
4F
3. REMOVAL AND INSTALLATION
1. Move the 2nd raw seat to te front end and unscrew the
rear shock absorber upper cover mounting screw (1).
2. Remove the rear shock absorber upper nut (2),
washer and bush.
Keep the specified end gap between shock absorber.
(A: 7 ~ 12 mm)
Tightening torque
30 ~ 40 Nm
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
6
REAR SUSP & AXLE
STAVIC - 2004.09
4F
3. Remove the rear propeller shaft.
4. Disconnect the parking brake cable.
5. unscrew the frame mounting bolt on the rear axle
carrier module front side.
6. Remove the wheel speed sensor (LH/RH).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст