SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 154
DI10-11
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
4. If the trouble has been change to “H (History trouble code)”
code, press “
” key to go back to “FUNCTION
SELECTION” screen. In this screen, select “4] TROUBLE
CODE CLEAR” and press “
”.
5. The “TROUBLE CODE CLEAR” screen is displayed. If
you press “
”, only the history trouble codes will be
cleared.
Note
•
Current trouble codes will not be cleared.
•
Check the trouble codes after clearing the trouble
codes.
DI10-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
ECU Identification
Preceding Work: Perform the “Entering Diagnosis Pro-
cedures”
1. Select “5] ECU IDENTIFICATION” and press “
” in
“FUNCTION SELECTION” screen.
2. The “ECU IDENTIFICATION” screen that shows the VIN,
ECU software number, ECU software version and
programming date is displayed.
3. If you replaced the ECU, press “
” to input the vehicle
identification number.
DI10-13
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
Injector (C2I) Corrections
Preceding Work: Perform the “Entering Diagnosis Pro-
cedures”
Notice
If the injector/ECU has been replaced or the injector system
defective is suspected, go to C2I Coding item and check
the injector and coded injector C2I value.
1. Select “6] INJECTOR (C2I) CORRECTIONS” and press
“
” in “FUNCTION SELECTION” screen.
2. The “INJECTOR (C2I) CORRECTIONS” screen that shows
current C2I coding values of #1 to #5 injector is displayed.
3. If you replaced the ECU, enter the C2I value of the relevant
injector.
Note
•
The C2I value of replacing injector is recorded in
the label.
•
C2I coding number: 16 digits (ex, B1 B9 D4 1B 43
C6 0E 4F)
DI10-14
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.9
3-1. If you enter the invalid C2I value of the relevant injector,
the message as shown in figure appears with alarm sound.
Note
If you want to go back to previous screen, press
“
” key. You can see the previous C2I value.
3-2. If you enter the valid C2I value of the relevant injector, the
message as shown in figure appears with alarm sound.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст