SsangYong Stavic / SsangYong Rodius (2005 year). Manual — part 273
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
14
2I
4) High Mounted Stop Lamp Assembly
Removal and Installation of High Mounted Stop Lamp
Preceding work: Disconnection of negative battery cable
1. Remove the high mounted stop lamp cover from the tailgate spoiler.
2. Unscrew the screws from the high mounted stop lamp, disconnect the lamp connector, and remove the lamp assembly.
Tailgate spoilera
Rearview camera
Rearview camera cover
High mounted stop lamp bulb
High mounted stop lamp
High mounted stop lamp cover
High mounted spoiler
Adhesive area
Lamp cover
Mounting screw
Adhesive area
Adhesive area
Mounting screw
Lamp
[Notice]
Be careful not to damage the installation surface when removing the tailgate spoiler.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
15
2I
6) Tail Lamp (Back-up) Lamp Assembly (Rear Fog Lamp)
2. Disconnect the back-up lamp connector (1) and remove
the nuts (2) from the tail lamp (back-up lamp) assembly.
3. Remove the tail lamp (back-up lamp) assembly and pull out the bulb from the removed tail lamp assembly.
License plate
lamp assembly
Bulb connector
Bulb
Lamp
Fog lamp /
Back-up lamp
Bulb connector
Bulb connector
Tail lamp
(back-up lamp)
/ Fog lamp
5) License Plate Lamp Assembly
1. Remove the license plate lamp assembly from the tailgate rear garnish.
2. Remove the bulb connector from the removed lamp assembly and pull out the bulb from the bulb connector.
3. Replace the bulb with new one and install the assembled lamp assembly into the mounting hole.
1. Remove the tailgate inner trim.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
16
2I
7) Tail Lamp Assembly
Preceding work: Disconnection of negative battery cable
1. Open the tailgate and remove two screws from the tail lamp assembly.
Tail lamp assembly (LH)
Tail lamp assembly (RH)
2. Disconnect the connector and remove the tail lamp assembly.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
LAMP
STAVIC - 2004.09
17
2I
3. Remove the bulb connector by rotating it counterclockwise from the removed tailgate lamp assembly. Pull out the
bulb from the bulb connector and install the new bulb with same specifications.
Tail (stop) lamp
Rear fog lamp
/ Rear turn signal lamp
Tail (position) lamp
Bulb connector
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст