SsangYong Rodius (2013 year). Manual — part 153
05-12
1) 2H Mode (2 Wheel Drive)
Power Flow
▶
Output shaft of
transmission
Rear propeller shaft
Rear wheel
Rear axle
Rear wheel
The driving force is directly engaged (1:1) to rear axle and is transferred only to the rear wheels.
Input shaft of transfer
case
↓
Output shaft of transfer
case
05-13
3240-01
2) 4H Mode (4 Wheel Drive - High Speed)
Power Flow
▶
The driving force is pass through 4WD High magnetic clutch in transfer case and is distributed
on front wheels and rear wheels (50;50).
05-14
3) 4L Mode (4 Wheel Drive - Low Speed)
Power Flow
▶
The gear ratio is reduced to 2.48;1 while passing through 4WD Low range and planetary gear set
in transfer case and the driving force is distributed on front wheels and rear wheels (50;50).
06-3
3310-01
1. SPECIFICATIONS
Description
Specification
Structure
Universal joint with yoke arm and spider and CV joint
Front propeller shaft (4WD)
One universal joint and one CV joint
Rear propeller shaft
Two universal joint and one CV joint
Run-out
below 0.4 mm
Unbalance
Max. 18g·cm / 4,500rpm
Length of front propeller
shaft
4WD A/T
531.2 ± 1.0 mm
Length of rear propeller
shaft
2WD
M/T
1892.1 ± 2.0 mm
A/T
1975.1 ± 2.0 mm
4WD A/T
1593.1 ± 2.0 mm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст