SsangYong Rexton. Manual — part 304
M162 ENGINE MECHANICAL 1B1-19
SSANGYONG Y200
POWER STEERING PUMP AND A/C BRACKET
Preceding Work : Removal of cooling fan and shroud
1 Vent Hose
2 Bolt (M8 x 91, 2 pieces)
. . . . . . ... 22.5-27.5 N•m (16.5-20.5 lb-ft)
3 Power Steering Pump
4 Bolt (M8 x 105, 4 pieces)
. . . . . . ... 22.5-27.5 N•m (16.5-20.5 lb-ft)
5 Washer
6 A/C Compressor
7 Bolt (M8 x 40, 3 pieces, M8 x 95, 2 pieces)
. . . . . . ... 22.5-27.5 N•m (16.5-20.5 lb-ft)
8 A/C Bracket
9 Gasket. . . . . . . . . . . . . Replace
10 Bracket
11 Bolt (M8 x 22, 2 pieces)
. . . . . . ... 22.5-27.5 N•m (16.5-20.5 lb-ft)
12 Tensioning Pulley
13 Nut . . . . . . 40.5-49.5 N•m (29.9-36.5 lb-ft)
YAD1B5A0
SSANGYONG Y200
1B1-20 M162 ENGINE MECHANICAL
Removal & Installation Procedure
1. Remove the belt tensioning pulley.
Installation Notice
3. Unscrew the bolts and remove the steering pump.
Installation Notice
2. Disconnect the hydraulic pipe of the power
steering pump and drain the oil.
4. Remove the compressor after disconnecting the
wiring connector and refrigerant pipe of A/C
compressor.
Notice: Discharge all the refrigerant before
removing the pipes.
Tightening Torque
40.5 - 49.5 N•m
(29.9 - 36.5 lb-ft)
Pull the tensioning pulley clockwise as shown in
the figure.
Tightening Torque
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
YAD1B250
YAD1B090
YAD1B260
YAD1B270
M162 ENGINE MECHANICAL 1B1-21
SSANGYONG Y200
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
;;;;;;;;;
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
yyyyyyyyy
6. Unscrew all the mounting bolts and remove the
A/C bracket and the gasket.
Installation Notice
5. Disconnect the vent hose from the A/C bracket.
Installation Notice
7. Clean the sealing surface.
8. Replace the gasket with new one.
9. Installation should follow the removal procedure
in the reverse order.
10. Check the oil leakage by operating the engine after
installation.
Tightening Torque
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
YAD1B280
YAD1B290
Tightening Torque
20 - 30 N•m
(15 - 22 lb-ft)
SSANGYONG Y200
1B1-22 M162 ENGINE MECHANICAL
ENGINE MOUNT
YAD1B300
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст