SsangYong Rexton. Manual — part 101
DI10-9
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Y220_10019
Y220_10018
4. If you want to operate the glow plug relay, press “
”
key. The “OPERATING” message appears and the relay
operation alarm sounds.
5. If you want to stop the operation press “
” key in
keyboard.
DI10-10
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Y220_10020
Y220_10021
Y220_10022
Y220_10023
Trouble Code Clear
Preceding Work: Perform the “Entering Diagnosis Proce-
dures”
1. Select “1] TROUBLE CODE” and press “
” in
“FUNCTION SELECTION” screen.
2. The “DIAGNOSTIC TROUBLE CODEs” screen is
displayed and it shows the trouble.
Note
C = Current trouble, H = History trouble
3. Fix the trouble and go back to “1] TROUBLE CODE”
screen and check if the trouble has been changed to “H
(History trouble code)” code.
DI10-11
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Y220_10024
Y220_10025
4. If the trouble has been change to “H (History trouble code)”
code, press “
” key to go back to “FUNCTION
SELECTION” screen. In this screen, select “4] TROUBLE
CODE CLEAR” and press “
”.
5. The “TROUBLE CODE CLEAR” screen is displayed. If
you press “
”, only the history trouble codes will be
cleared.
Note
•
Current trouble codes will not be cleared.
•
Check the trouble codes after clearing the trouble
codes.
DI10-12
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
DIAGNOSIS
DI ENG SM - 2004.4
Y220_10027
Y220_10028
Y220_10029
Y220_10030
ECU Identification
Preceding Work: Perform the “Entering Diagnosis Proce-
dures”
1. Select “1] ECU IDENTIFICATION” and press “
” in
“FUNCTION SELECTION” screen.
2. The “ECU IDENTIFICATION” screen that shows the VIN,
ECU software number, ECU software version and
programming date is displayed.
3. If you replaced the ECU, press “
” to input the vehicle
identification number.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст