SsangYong Actyon Sports II. Manual — part 81
02-11
8710-01
The auto washer switch input is overridden during the washer coupled wiper operation.
The auto washer switch input is overridden during the auto washer coupled wiper operation.
The auto washer switch input is overridden during the rain sensor coupled wiper or vehicle
speed sensitive INT wiper operation.
When the auto INT switch input is received during the auto washer operation, the auto washer
operation stops and the auto INT operation is activated.
-
-
-
-
02-12
▶Rain Sensor Coupled Wiper and Auto Light Control
If equipped with RKSTICS rain sensor, it has following operation system.
-
▶System layout
02-13
8710-01
Rain sensing unit
(AUTO light integrated type)
▶INT Switch Auto Position Reminder (Power-Up Reminder Wiper)
When turning off and on the auto INT switch, the system drives the wiper motor through LOW
relay regardless of communication with rain sensor.
When turning the INT-AUTO switch from the "OFF" to "ON" position with the ignition switch in the
"ON" mode, the LOW relay operates to drive the wiper motor for 1 cycle, regardless of the rain
sensor communication.
After that, when turning the INT-AUTO switch from the "OFF" to "ON" position, the LOW relay
operates to drive the wiper motor for 1 cycle only if data from the rain sensor indicates rain drops.
-
-
Multifunction wiper switch:
AUTO and sensitivity control
A sensor that emits infrared rays through LED and
then detects the amount of rain drops by receiving
reflected rays against sensing section (rain sensor
mounting section on the windshield) with
photodiode (auto light sensor integrated type)
AUTO: Wiper operates automatically by rain sensor
FAST↔SLOW: Auto delay/Auto speed control. A
position that can control sensitivity against rains on
the windshield and transmits wiping demand signal
accordingly
02-14
▶Washer Coupled Wiper in Rain Sensing Mode
The washer coupled wiper is operated when receiving the washer switch input with the ignition
switch and the INT-AUTO switch "ON" in the rain sensing mode. At this moment, the
communication with the rain sensor is overridden. However, a washer input is overridden if there is
an output for continuous operation.
The operation data is sent to the rain sensor even during the washer coupled wiper's operation.
-
-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст