Isuzu Trooper (2000 year). Manual — part 393
7A–92
AUTOMATIC TRANSMISSION (4L30–E)
Internal Components
247RW002
Legend
(608) Seal, Reverse Clutch Piston (Inner)
(609) Seal, Reverse Clutch Piston (Outer)
(610) Piston, Reverse Clutch
(611) Spring, Piston Clutch
(612) Seat, Spring/Reverse Clutch
(613) Ring, Retaining
(614) Plate, Waved/Reverse Clutch
(615) Plate, Reverse Clutch (Steel)
(616) Plate Assembly, Reverse Clutch (Lined)
(617) Plate, Reverse Clutch Pressure/Selective
(618) Drum Assembly, 2nd Clutch
(620) Seal, 2nd Clutch Piston (Inner)
(621) Seal, 2nd Clutch Piston (Outer)
(622) Piston, 2nd Clutch
(623) Seat, Spring/2nd Clutch
(625) Plate, Waved/2nd Clutch
(626) Plate, 2nd Clutch (Steel)
(627) Plate Assembly, 2nd Clutch (Lined)
(628) Spacer, 2nd Clutch
(629) Ring, Retaining
(630) Gear, Ring
(631) Washer, Thrust/2nd Clutch/3rd Clutch
(632) Thrust Washer, Clutch Hub
(634) Drum Assembly, 3rd Clutch
(635) Seal, 3rd clutch piston (Inner)
(636) Washer, Retaining
(637) Seal, 3rd Clutch Piston (Outer)
(638) Piston 3rd Clutch
(639) Seat, Spring/3rd Clutch
(640) Ring, Retaining
(641) Plate, Spring Cushion/3rd Clutch
(642) Plate, 3rd Clutch (Steel)
(643) Plate Assembly, 3rd Clutch (Lined)
(644) Washer, Thrust/Input Sun
(645) Bearing, Input Shaft/Gear Assembly
7A–93
AUTOMATIC TRANSMISSION (4L30–E)
(646) Gear Assembly, Input Sun
(647) Race Assembly, Sprag
(648) Ring, Retaining/Sprag
(649) Ring, Retaining
(650) Cage Assembly, Sprag
(651) Bearing, Output Shaft/Input Sun
(652) Washer, Output Shaft/Input Sun
(653) Carrier Assembly, Planetary
(658) Gear, Reaction Sun
(659) Drum, Reaction Sun
(664) Band Assembly, Brake
(667) Seal, Ring/Wheel Parking Lock
(668) Wheel, Parking Lock
(672) Wheel, Speed
(673) Ring, Retaining
(675) Bearing, Thrust Assembly
Center Support Assembly
242RY002
Legend
(701) Center Support
(702) Retainer Plate
(703) Plug, Lockout
(704) Spring, Lockout
(705) Valve, Overrun Lockout
(706) Valve, Reverse Lockout Control
7A–94
AUTOMATIC TRANSMISSION (4L30–E)
Extension Housing Assembly Oil Seal
Extension Housing Assembly Rear Oil Seal and Associated Parts
220RY00010
Legend
(1) Propeller Shaft
(2) End Nut and Companion Flange
(3) Oil Seal
(4) Mass
Removal
1. Disconnect the propeller shaft (1) and mass (4) from
the extension housing assembly.
2. Remove end nut and companion flange (2), using the
companion flange holder J–8614–11.
266RW001
3. Use the universal puller to remove the companion
flange and O–ring.
4. Remove the oil seal from the extension housing
assembly.
Installation
1. Install oil seal and apply engine oil to the oil seal outer
surfaces.
2. Apply the recommended grease (BESCO L2) or
equivalent to the oil seal lip.
3. Use the oil seal installer J–39208 to install the rear
seal (3) to the extension housing assembly.
220RS016
7A–95
AUTOMATIC TRANSMISSION (4L30–E)
4. Install the companion flange (2) and O–ring (2).
5. Use the companion flange holder J–8614–11 to install
a new end nut (2) and tighten to the specified torque.
Torque: 167 N·m (123 lb ft)
6. Use the punch J–39209 to stake the end nut at two
spots.
NOTE: Be sure to confirm that there is no crack at the
staked portion of the end nut (2) after staking.
266RS001
266RW002
7. Connect the mass and propeller shaft to the
extension housing assembly and tighten to the
specified torque.
Torque: 63 N·m 46 (lb ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст