Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1586
SHEET METAL 2B-3
7. Inner Liner
Remove the inner liner fixing screws.
11. Fender
First, remove the bolt (See illustration arrow mark) from the
inside of the car.
2B-4 SHEET METAL
ADJUSTMENT
A
C
B
A. Check the Engine Hood and Fender
mm (in.)
Clearance (a)
4 (0.157)
Height (b)
Flush
Adjust the clearance (a) with the hinges on the engine hood.
Adjust the step (b) with the hood rests.
B. Check the Fender and Door
C. Check the Door and Body
D. Check the Front Door and Rear Door
mm (in.)
Clearance (a)
5.5 (0.217)
Height (b)
Flush
Adjust clearance (a) with door hinges.
Adjust the step (b) by tapping on the fender lightly with a rubber
hammer.
TFFAB-WE-0101
You are requested to order this manual using the
manual number that is shown above.
This manual is applicable for vehicles in all countries
except the USA, Canada, Europe and Thailand.
All rights reserved, This manual may not be
reproduced in whole or in part, without the permission
in writing of ISUZU MOTORS LIMITED.
Issued by
ISUZU MOTORS LIMITED
INTERNATIONAL SERVICE DEPARTMENT
Tokyo, Japan
First edition FEB., 2001
1102-01A-1.98
No. TFFAB-WE-0101
PRINTED IN JAPAN
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст