Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 2054
3C-20 FRONT SUSPENSION
Setting mark
Important Operations
1. Adjust Bolt
Apply the setting marks to the adjust bolt and height control
arm.
2. Height Control Arm
Apply the setting marks to the height control arm and torsion
bar.
3. Torsion Bar
Apply the setting marks to the torsion bar and lower link.
13.Shock Absorber (For Australia)
CAUTION :
The shock absorbers have been charged with gas at the
factory. Exposure to high temperatures or an open flame
can result in a dangerous explosion.
Keep the shock absorbers away from high temperatures
and open flames.
FRONT SUSPENSION 3C-21
INSPECTION AND REPAIR
Make all necessary adjustments, repairs, and part replacements if wear, damage, or other problems are discovered
during inspection.
•
Torsion bar, height control arm
•
Strut bar
•
Stabilizer bar
•
Shock absorber
•
Rubber bushing
Visual Check
Inspect the following parts for wear, damage or other abnormal
conditions.
3C-22 FRONT SUSPENSION
REASSEMBLY
Reassembly Steps
Torsion Bar
1. Rubber seat
V
2. Torsion Bar
V
3. Height control arm
V
4. Adjust bolt, seat
Stabilizer Bar
5. Stabilizer bar
6. Rubber bushing and washer
V
7. Nut
8. Bracket
9. Bolt
Shock Absorber
10. Lower link bumper
11. Rubber bushing and washer
12. Shock absorber
13. Rubber bushing and washer
V
14. Nut
V
15. Bolt, nut, and washer
FRONT SUSPENSION 3C-23
Important Operations
2. Torsion Bar
(1) Apply grease to the serrated portions.
(2) Align the setting marks.
(3) Note the emboss mark on its side face.
R : Right side
L : Left side
3. Height Control Arm
(1) Apply grease to the portion that fits into the bracket.
(2) Align the setting marks.
(3) Apply grease to the bolt portion of the end piece.
(4) Apply grease to the portion of the seat that fits in to the
bracket.
4. Adjust Bolt
(1) Turn in the adjust bolt to location marked during
disassembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст