Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1231
8-264 ELECTRICAL-BODY AND CHASSIS
Timing Belt Indicator Light Reset Procedure
1. Remove the masking tape from the hole
B
.
2. Remove the screw from the hole
A
and install it to the hole
B
.
3. Apply new masking tape to the hole
A
.
Note:
The above procedure assumes that the timing belt is
being replaced for the first time (after 100,000 km).
For subsequent reset procedure (at next 100,000 km), hole
positions will be the opposite of the above procedure.
ELECTRICAL-BODY AND CHASSIS 8-265
HEATER AND AIR CONDITIONING
PARTS LOCATION (LHD EXCEPT EC)
8-266 ELECTRICAL-BODY AND CHASSIS
PARTS LOCATION (6VD1-LHD)
ELECTRICAL-BODY AND CHASSIS 8-267
PARTS LOCATION (6VD1-RHD)
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст