Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 359
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-285
241RY00018
TORQUE CONVERTER
INSPECTION AND REPAIR
Insert special tool in end of torque converter.
Insert a turning tool into the inner race of the one-way
clutch.
One-way clutch testing tool : 5-8840-2168-0
(J-35467)
Insert the stopper so that it fits in the notch of the
converter hub and outer race of the one-way clutch.
One-way clutch test
The clutch should lock when turned counterclockwise,
and rotate freely and smoothly clockwise. Less than 25
kg・cm (22 Ib・in) of torque should be required to rotate
the clutch clockwise. If necessary, clean the converter
and retest the clutch. Replace the converter if the
clutch still fails the test.
7A-286 AUTOMATIC TRANSMISSION (AW30-40LE)
ADAPTER HOUSING (4×
×
×
×4)
DISASSEMBLY
241R200005
Disassembly steps
1. Oil
seal
2. Adapter
housing
Disassembly steps
1. Oil seal
2. Adapter housing
Using a screwdriver, remove the oil seal.
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-287
REASSEMBLY
241R200006
Reassembly steps
1. Adapter
housing
2. Oil
seal
240RY00003
Reassembly steps
1. Adapter housing
2. Oil seal
Using oil seal installer, install the new oil seal to the
adapter housing.
Oil seal installer : 5-8840-2282-0
7A-288 AUTOMATIC TRANSMISSION (AW30-40LE)
EXTENSION HOUSING (4×
×
×
×2)
DISASSEMBLY
241R200007
Disassembly steps
1. Gasket
2. Tube
3. Tube
packing
4. Oil
seal
5. Dust
deflector
6. Extension
housing
Disassembly steps
1. Gasket
2. Tube
3. Tube packing
4. Oil seal
Using a screwdriver, remove the oil seal.
NOTE:
The oil seal can be removed without removing the
dust deflector.
5. Dust deflector
6. Extension housing
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст