Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1905

7A4-52 UNIT REPAIR (JR405E)

40C&L-SUB46

15.Bearing race

16.Rear carrier

17.Bearing

Install the bearing race and the bearing to the rear carrier.

NOTE:
Apply Vaseline to the fitting surfaces of the rear carrier to
prevent the bearing race and the bearing from falling
during the installation process.

41C&L-SUB49

42C&L-SUB61

•

Install the rear carrier to the low clutch drum.

43C&L-SUB07

18.Rear sun gear

Install the rear sun gear to the low clutch drum.

44C&L-SUB52

19.Bearing (with bearing race)

20.Front carrier

Install the bearing (with bearing race) to the front carrier.

NOTE:
Apply Vaseline to the fitting surfaces of the front carrier to
prevent the bearing from falling during the installation
process.

UNIT REPAIR (JR405E) 7A4-53

45C&L-SUB04

21.Snap ring

•

Install the front carrier to the low clutch drum.

•

Install the snap ring to the low clutch drum.

7A4-54 UNIT REPAIR (JR405E)

TRANSMISSION CASE

02CASE-BK06

Legend

1. Transmission case

2. Spring pin (slender)

3. Spring pin (fat)

4. Manual plate

5. Detent spring

6. Parking rod

7. Manual shaft

8.

Oil

seal

9.

Inhibitor

switch

UNIT REPAIR (JR405E) 7A4-55

01L&R-CS05

Legend

1. Seal ring

2. Low one-way clutch inner race

3. Return spring

4. Low and reverse brake piston

5. Seal ring

6.

Lip

seal

7. Transmission case

8.

Snap

ring

9. Retaining plate

10. Driven plate
11. Drive plate
12. Dish plate

04CASE-AY52

Disassembly steps

1. Harness assembly

Remove the fixing bolt and the harness assembly.