Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1597
FRAME AND BUMPER 2A-3
REAR BUMPER
REMOVAL AND INSTALLATION
Removal Steps
1. Bolt; back bar to frame
2. Back bar
3. Bolt; back bar to rear bumper
4. Cap; rear bumper
5. Rear bumper
Installation Steps
5. Rear bumper
4. Cap; rear bumper
▲
3. Bolt; back bar to rear bumper
2. Back bar
1. Bolt; back bar to frame
Important Operation - Installation
3. Bolt; Back Bar to Rear Bumper
Torque
N
⋅
m(kgf
⋅
m/lb
⋅
ft)
103
±
9.8 (10.5
±
1 / 75.9
±
7.2)
2A-4 FRAME AND BUMPER
REAR BODY
REMOVAL AND INSTALLATION
Removal Steps
1. Battery ground cable
2. Rear combination lamp harness
▲
3. Fuel filler pipe and evaporator hose
4. Spare tire
5. Bolt; frame to rear body
▲
6. Rear body assembly
Installation Steps
6. Rear body assembly
▲
5. Bolt; frame to rear body
4. Spare tire
3. Fuel filler pipe and evaporator hose
2. Rear combination lamp harness
1. Battery ground cable
NOTE:
The rear body must be empty before removal.
FRAME AND BUMPER 2A-5
Important Operation - Removal
3. Fuel Filler Pipe and Evaporator Hose
Disconnect the fuel filler pipe and evaporator hose.
6. Rear Body Assembly
Attach lifting wires to the rear body and raise the rear body.
Note:
In lifting up rear body, take care not to dash it against cab
body.
Important Operation - Installation
5. Bolt; Frame to Body
Torque
N
⋅
m(kgf
⋅
m/lb
⋅
ft)
63.8
±
14.7 (6.5
±
1.5 / 47
±
10.8)
2A-6 FRAME AND BUMPER
BODY MOUNTING
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст