Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1415

ELECTRICAL-BODY AND CHASSIS 8-225

(5) If there is a place where the voltage suddenly changes to

0V, there is a broken wire between there and the power

side.

(6) Move the tester probe from the position where the voltage

changes to 0V toward the power side and find where the

voltage suddenly increases.

REPAIR OF BROKEN HEAT WIRE

(1) Clean broken wire tips with white gasoline.

(2) Place masking tape along both sides of wire to be repaired.

(3) Throughly mix the repair agent (Dupont paste No. 4817 or

equivalent).

(4) Using a fine tip brush, apply a small amount to the wire.

(5) After a couple of minutes, remove the masking tape.

(6) Allow to stand at least 24 hours.

8-226 ELECTRICAL-BODY AND CHASSIS

RADIATOR LEVEL CONTROL WARNING SYSTEM

PARTS LOCATION (LHD ONLY)

ELECTRICAL-BODY AND CHASSIS 8-227

CIRCUIT DIAGRAM

8-228 ELECTRICAL-BODY AND CHASSIS

CONNECTOR LIST

No.

Connector face

No.

Connector face

B-1

B-11

B-2

B-12

B-3

B-13

B-4

NOT USED

B-14

B-5

B-15

B-6

NOT USED

B-16

B-7

B-17

NOT USED

B-8

B-18

NOT USED

B-9

B-19

B-10

B-20