Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 1987
STEERING 3B-27
MANUAL STEERING UNIT
DISASSEMBLY
Disassembly Steps
1. Lock nut
! 2. Side cover
3. Gasket
4. Adjusting screw
5. Adjusting shim
6. Needle bearing
! 7. Sector shaft
! 8. Lock nut
! 9. End cover
10. Oil seal
11. O-ring
!12. Ball nut and worm shaft
13. Bearing
14. Bearing
15. Oil seal
16. Gear box
3B-28 STEERING
Important Operations
2. Side Cover
(1) Turn the adjusting screw counter-clockwise slightly, then
remove the side cover fixing bolt.
(2) Turn the adjusting screw clockwise with the side cover held
from turning.
7. Sector Shaft
Hold the sector shaft in straight-ahead position when removing
it from the gear box. Do not drive the sector shaft off the gear
box with a hammer or other impact tools.
8. Lock Nut
Lock Nut Wrench : 5-8840-2006-0
(J-29753)
9. End Cover
(1) End Cover Remover : 5-8840-2007-0
(J-7624)
STEERING 3B-29
(2) When removing, take care so as not to damage the oil seal.
Taping the splines will provide some protection.
12.Ball-Nut and Worm Shaft
Always keep ball-nut assembly in a horizontal position. Do not
hold it vertically, or ball-nut will slide out.
3B-30 STEERING
INSPECTION AND REPAIR
Make necessary correction or parts replacement if wear, damage or any other abnormal conditions are found
through inspection.
• Bearing
• Oil seal, bushing
• Ball-nut and worm shaft
• Sector shaft
• Gear box
Visual Check
Inspect the following parts for wear, damage or other abnormal
conditions.
Ball-Nut Rotation
Hold the worm shaft vertically and check that the ball-nut
lowers with a smooth turning motion. If the lowering of the ball-
nut by its own weight is not smooth, check the worm shaft for
bending and the ball-groove for burrs, dents, and foreign
matter.
Note :
When testing the ball-nut assembly, do not let it travel all
the way to the end of worm shaft, or damage to the ball
tubes will result.
Sector Shaft Outside Diameter
mm(in)
Standard
Limit
A
28.6 (1.13)
28.3 (1.12)
B
31.8 (1.25)
31.5 (1.24)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст