Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 353
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-261
Reassembly steps
1. Lower valve body
2. Washer
3. Primary
regulator
valve
4. Plunger
5. Plunger
6. Spring
7. Sleeve
8. Retainer
9. Cut
back
valve
10. Spring
11. Plug
12. Retainer
13. Coast modulator valve
14. Spring
15. Retainer
16. Accumulator control valve
17. Spring
18. Plug
19. Retainer
20. Low coast modulator valve
21. Spring
22. Retainer
23. 1-2 shift valve
24. Spring
25. Plug
26. Retainer
27. Ball
28. Spring
29. Retainer
30. Accumulator sub-assembly
31. Clamp
32. Lock-up solenoid SL
33. Shift solenoid S2
34. Shift solenoid S1
35. Strainer
36. Spring
37. By-pass valve
244R200060
Reassembly steps
1. Lower valve body
2. Washer
3. Primary regulator valve
Install the washer onto the primary regulator valve.
Install the primary regulator valve with the washer into
the bore.
4. Plunger
5. Plunger
Install the two plungers into the sleeve.
6. Spring
7. Sleeve
Install the sleeve with the two plungers and spring into
the bore.
7A-262 AUTOMATIC TRANSMISSION (AW30-40LE)
244R200072
8. Retainer
Install the retainer to the bevel by pushing in the
sleeve.
NOTE:
Install the retainer to the same position on the
sleeve, as when disassembling.
244R200059
244R200065
9. Cut back valve
10. Spring
11. Plug
Install the cut back valve, spring and plug into the bore.
12. Retainer
Install the retainer by pushing in the plug.
244R200071
244R200058
13. Coast modulator valve
14. Spring
15. Retainer
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-263
244R200070
244R200057
16. Accumulator control valve
17. Spring
18. Plug
Install the accumulator control valve, spring and plug
into the bore.
19. Retainer
Install the retainer by pushing in the plug.
244R200069
244R200056
20. Low coast modulator valve
21. Spring
Install the low coast modulator valve and spring into the
bore.
22. Retainer
Install the retainer by pushing in the spring.
244R200068
7A-264 AUTOMATIC TRANSMISSION (AW30-40LE)
244R200054
23. 1-2 shift valve
24. Spring
25. Plug
Install the 1-2 shift valve, spring and plug into the bore.
26. Retainer
Install the retainer by pushing in the plug.
244R200067
244R200052
27. Ball
28. spring
29. Retainer
Install the ball, spring and retainer (5) to the valve body.
Torque: 10 N・・・・m (1.0 kg・・・・m/87 Ib・・・・in)
30. Accumulator sub-assembly
31. Clamp
Install the accumulator sub-assembly (4) and clamp to
the valve body.
Torque: 6.4 N・・・・m (0.65 kg・・・・m/57 Ib・・・・in)
32. Lock-up solenoid SL
Install a new O-ring to the solenoid (3).
Install the solenoid to the valve body.
Torque: 10 N・・・・m (1.0 kg・・・・m/87 Ib・・・・in)
33. Shift solenoid S2
34. Shift solenoid S1
Install a new O-ring to the solenoids (1) and (2).
Install the solenoids to the valve body.
Torque: 6.4 N・・・・m (0.65 kg・・・・m/57 Ib・・・・in)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст