Isuzu D-Max / Isuzu Rodeo (TFR/TFS). Manual — part 352
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-257
244R200058
244R200071
26. Retainer
Remove the retainer with a magnetic finger by pushing
in the plug.
27. Plug
28. Spring
29. Cut back valve
Remove the plug, spring and cut back valve.
244R200065
244R200072
244R200059
30. Retainer
Place a mark on the bevel when the retainer is
positioned.
NOTE:
When reassembling, position the retainer in the
same position.
Remove the retainer with a magnetic finger by pushing
in the sleeve.
31. Sleeve
32. Plunger
33. Plunger
34. Spring
35. Washer
36. Primary regulator valve
Remove the sleeve with the plungers, spring and
washer.
Remove the two plungers from the sleeve.
7A-258 AUTOMATIC TRANSMISSION (AW30-40LE)
244R200060
Remove the primary regulator valve from the valve
body.
37. Lower valve body
244R200051
INSPECTION AND REPAIR
Inspect strainer
Inspect strainer for residual adhesive and damage, and
clean and replace as necessary.
Inspect valve springs
Check for damage, squareness, rust and distorted
coils.
Measure the spring free height and replace if less than
shown below.
Spring Free
length
(1) By-pass valve
21.3 mm (0.839 in)
(2) Steel ball
20.5 mm (0.807 in)
(3) 1-2 shift valve
30.8 mm (1.213 in)
(4) Low coast modulator valve 30.4 mm (1.197 in)
(5) Accumulator control valve
33.8 mm (1.331 in)
(6) Coast modulator valve
26.6 mm (1.047 in)
(7) Cut back valve
34.0 mm (1.339 in)
(8) Primary regulator valve
41.6 mm (1.638 in)
244R200077
AUTOMATIC TRANSMISSION (AW30-40LE) 7A-259
REASSEMBLY
244R200046
7A-260 AUTOMATIC TRANSMISSION (AW30-40LE)
244R200076
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст