Isuzu Rodeo UE. Manual — part 537
ENTERTAINMENT
8C–3
4. Remove the meter cluster assembly (4).
Refer to Instrument Panel Assembly in Body
Structure section.
5. Remove the digital clock (3).
f
Remove the fixing screw.
f
Disconnect the connector.
821RW092–1
Installation
To install, follow the removal steps in the reverse order.
Rod Type Antenna
Removal
1. Disconnect the battery ground cable.
2. Turn the antenna rod (1) counterclockwise to remove
it.
3. Remove three screws and nine clips to remove the
fender inner liner (2).
4. Disconnect the feeder cable connector (3) at the
inside of the vehicle, remove the housing bracket
screw, turn the lock nut counterclockwise to remove it
together with the base mold and then remove the
housing.
890RW020
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
8C–4
ENTERTAINMENT
Accessory Socket
Front Accessory Socket
Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly.
3. Remove the front accessory socket (2).
f
Disconnect the connectors (1).
f
Pull out the front accessory socket from the soket
cover (3).
810RW005
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
Rear Accessory Socket
Removal
1. Disconnect the battery ground cable.
2. Remove the quarter trim lower cover.
3. Remove the rear accessory socket (2).
f
Disconnect the connectors (1).
f
Pull out the front accessory socket from the soket
cover (3).
810RW004
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
ENTERTAINMENT
8C–5
Radio
Removal
1. Disconnect the battery ground cable.
2. Remove the lower cluster assembly (1).
f
Refer to Instrument Panel Assembly in Body
Structure section.
890RW022
3. Remove the radio (5).
f
Remove the two fixing screws.
f
Disconnect the connector (3) and the antenna cable
(4).
890RX013
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
8C–6
ENTERTAINMENT
Speaker
Front Speaker
Removal
1. Disconnect the battery ground cable.
2. Pull the grille (1) to release the locks and then remove
it.
3. Remove four screws and disconnect the connector
(3) to remove the speaker (2).
890RX012
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
Tweeter Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the front door trim pad (2).
f
Refer to Front Window Regulator, Glass And Glass
Run in Body Structure section:
3. Remove the tweeter (1).
f
Disconnect the connector.
635RW009
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
Rear Speaker
Removal
1. Disconnect the battery ground cable.
2. Remove the roof rear lining (1).
f
Release the locks and clips.
3. Remove the speaker (2).
f
Remove the four screws.
f
Disconnect the connector (3).
890RW019–1
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст