Isuzu Rodeo UE. Manual — part 441
6F–6
ENGINE EXHAUST (6VD1 3.2L)
Exhaust Silencer
Exhaust Silencer and Associated Parts
150RW027
Legend
(1) Forked Exhaust Pipe
(2) Support Rubber Fixing Nuts
(3) Exhaust Silencer
(4) Exhaust Silencer Fixing Nuts
(5) Rear Exhaust Pipe Fixing Nuts
Removal
1. Disconnect battery ground cable.
2. Lift up the vehicle and support with suitable safety
stands.
3. Remove the support rubber fixing nuts (2), the
exhaust silencer fixing nuts (4) and rear exhaust pipe
fixing nuts (5), then remove the exhaust silencer (3).
Installation
1. Install the exhaust silencer (3) and tighten the fixing
nuts (4) (5) to the specified torque.
Torque
Nuts: 43 N·m (32 lb ft)
2. Tighten the support rubber fixing nuts (2) to the
specified torque.
Torque
Bolts: 15 N·m (11 lb ft)
6F–7
ENGINE EXHAUST (6VD1 3.2L)
Rear Exhaust pipe
Rear Exhaust pipe and Associated
Parts
150RW028
Legend
(1) Mounting Rubber
(2) Rear Exhaust Pipe Fixing Nuts
(3) Mounting Rubber
(4) Rear Exhaust Pipe
Removal
1. Disconnect battery ground cable.
2. Lift up the vehicle and support with suitable safety
stands.
3. Remove the rear exhaust fixing nuts (2) and the
mounting rubbers (1) (3), then remove the rear
exhaust pipe (4).
Installation
1. Install the rear exhaust pipe (4) and the mounting
rubbers (1) (3), then tighten the fixing nuts (2) to the
specified torque.
Torque
Nuts: 43 N·m (32 lb ft)
6F–8
ENGINE EXHAUST (6VD1 3.2L)
Main Data and Specifications
Torque Specifications
150RW033
6G–1
ENGINE LUBRICATION (6VD1 3.2L)
RODEO
ENGINE
ENGINE LUBRICATION (6VD1 3.2L)
CONTENTS
Service Precaution
6G–1
. . . . . . . . . . . . . . . . . . . . . .
General Description
6G–2
. . . . . . . . . . . . . . . . . . . . .
Oil Pump
6G–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Pump and Associated Parts
6G–3
. . . . . . . . . .
Disassembly
6G–4
. . . . . . . . . . . . . . . . . . . . . . . . . .
Inspection and Repair
6G–4
. . . . . . . . . . . . . . . . . .
Reassembly
6G–5
. . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Pan and Crankcase
6G–7
. . . . . . . . . . . . . . . . . .
Removal
6G–7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
6G–7
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Pump
6G–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
6G–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
6G–9
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Pump Oil Seal
6G–11
. . . . . . . . . . . . . . . . . . . . . . .
Removal
6G–11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
6G–11
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Oil Filter
6G–12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removal
6G–12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation
6G–12
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main Data and Specification
6G–13
. . . . . . . . . . . . . .
Service Precaution
WARNING: THIS VEHICLE HAS A SUPPLEMENTAL
RESTRAINT SYSTEM (SRS). REFER TO THE SRS
COMPONENT AND WIRING LOCATION VIEW IN
ORDER TO DETERMINE WHETHER YOU ARE
PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING. WHEN YOU
ARE PERFORMING SERVICE ON OR NEAR THE SRS
COMPONENTS OR THE SRS WIRING, REFER TO
THE SRS SERVICE INFORMATION. FAILURE TO
FOLLOW WARNINGS COULD RESULT IN POSSIBLE
AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
OTHERWISE UNNEEDED SRS SYSTEM REPAIRS.
CAUTION: Always use the correct fastener in the
proper location. When you replace a fastener, use
ONLY the exact part number for that application.
ISUZU will call out those fasteners that require a
replacement after removal. ISUZU will also call out
the fasteners that require thread lockers or thread
sealant. UNLESS OTHERWISE SPECIFIED, do not
use supplemental coatings (Paints, greases, or other
corrosion inhibitors) on threaded fasteners or
fastener joint interfaces. Generally, such coatings
adversely affect the fastener torque and the joint
clamping force, and may damage the fastener. When
you install fasteners, use the correct tightening
sequence and specifications. Following these
instructions can help you avoid damage to parts and
systems.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст