Isuzu KB P190. Manual — part 55
SHEET METAL 2B-23
REAR BODY
REMOVAL AND INSTALLATION
A type
RTW32MF000301
2B-24 SHEET METAL
B type
RTW52BMF000301
Removal Steps
Installation Steps
1. Battery ground cable
2. Rear combination lamp & license lamp
harness connector
3. Rear wheel housing extension panel
4. Fuel filler door release cable assembly
5. Fuel filler pipe and evaporator hose
6. Bolt; frame to rear body
7. Rear body assembly
7. Rear body assembly
6. Bolt; frame to rear body
5. Fuel filler pipe and evaporator hose
4. Fuel filler door release cable assembly
3. Rear wheel housing extension panel
2. Rear combination lamp & license lamp
connector
1. Battery ground cable
NOTE:
The rear body must be empty before removal.
SHEET METAL 2B-25
Important Operations - Removal
5. Fuel Filler Pipe and Evaporator Hose
7. Rear Body Assembly
Attach lifting wires to the rear body hooks and raise the rear
body.
Note:
In lifting up rear body, take care not to strike it against cab
body.
Important Operation – Installation
6. Bolt; Frame to Body
Torque N
⋅m(kgf⋅m/lb⋅ft)
54 (5.5 / 40)
2B-26 SHEET METAL
BODY MOUNTING
REGULAR CAB Model
RTW72BXF000101
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст