Isuzu KB P190. Manual — part 54
SHEET METAL 2B-19
Important Operations - Removal
1. Front Combi Lamp Assembly
2. Radiator Grille
Refer to the Radiator Grille in this section.
5. Inner Liner
Remove the inner liner fixing screws.
6. Front Bumper Fascia
Refer to the Front Bumper in this section.
RTW52BSH000401
8. Front Fender Panel
Remove the 8 fixing bolts.
Important Operation - Installation
8. Front Fender Panel
1) Tighten the front fender panel fixing bolts to the
specified torque.
Torque N
⋅m(kgf⋅m/lb⋅in)
10 (1.0 / 87)
2B-20 SHEET METAL
RTW72BSH001201
2) Check the fender and front door (1).
• Clearance : 5.0 mm (0.2 in)
• Height (step) : Flushness
RTW32BSH000301
SHEET METAL 2B-21
RADIATOR GRILLE (A TYPE)
REMOVAL AND INSTALLATION
3
1
1
2
RTW72BMF000501
Removal Steps
Installation Steps
1. Screw
4. Radiator grille
2. Clip
3. Bolt
3. Bolt
2. Clip
4. Radiator grille
1. Screw
Important Operation - Removal
2. Clip
Pull the grille together with the 2 clips from the vehicle.
2B-22 SHEET METAL
RADIATOR GRILLE (B TYPE)
REMOVAL AND INSTALLATION
RTW52BMF000201
Removal Steps
Installation Steps
1.
Screw
2. Front combi lamp assembly
3. Screw
4. Clip
5. Radiator grille
5. Radiator grille
4. Clip
3. Screw
2. Front combi lamp assembly
1.
Screw
Important Operation - Removal
4. Clip
• Use a screwdriver to release the 4 clips at the top of the
radiator grille.
• Pull the grille together with the 2 bottom clips from the
vehicle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст