Isuzu KB P190. Manual — part 99
3D-12 REAR SUSPENSION
Reassembly
1. Apply grease to both faces of each leaf spring at
reassembly.
2. Set the leaf springs, aligning them to the setting mark made
before disassembly.
F03L100006
3. Assemble the leaf springs using a bench press.
4. Apply grease to the outside of the bushing.
Install a new center bolt and tighten it to the specified
torque.
Torque N
⋅m (kgf⋅m/lb⋅ft)
29 (3.0/22)
5. Install the bushing using a bench press and a suitable
metal fitting.
REAR SUSPENSION 3D-13
REAR STABILIZER BAR
STABILIZER BAR AND ASSOCIATED PARTS
RTW73DLF000101
Legend
1.
Bolt
2.
Bush
3. Stabilizer Bar
4.
Cap
5.
Nut
6.
Link
7. Stabilizer Bar Assembly
8.
Nut
3D-14 REAR SUSPENSION
Removal
1. Remove the bolt and nut.
2. Take out the stabilizer bar assembly.
3. Remove the nut and take out the link from the stabilizer
bar.
4. Take out the cap and bush from the stabilizer bar.
Installation
1. Set the bush and cap on the stabilizer bar.
2. Install the link on the stabilizer bar and tighten the nut to the
specified torque.
Torque N
⋅m (kgf⋅m/lb⋅ft)
50 (5.1/37)
3. Install the stabilizer bar assembly on the rear axle and
tighten the bolt to the specified torque.
Torque N
⋅m (kgf⋅m/lb⋅ft)
25 (2.5/18)
4. Set the stabilizer bar assembly to the frame bracket and
tighten the nut to the specified torque.
Torque N
⋅m (kgf⋅m/lb⋅ft)
50 (5.1/37)
REAR SUSPENSION 3D-15
TROUBLESHOOTING
1. BODY INCLINATION
Checkpoint Problem
Countermeasure
Replace
Bushings worn or
disintegrated
NG
Mounting brackets
Shock absorbers
Replace
Defective
Spring brackets and U-bolts
Shackle pins and bushings
Replace
Retighten
Replace
Cracked
Bolt loosened
Worn or disintegrated
Regrease
Replace
Poorly lubricated
Weak or broken
OK
OK
OK
NG
NG
NG
NG
NG
NG
OK
Spring
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст