Isuzu KB P190. Manual — part 1448
10-34 CAB
Important Operations
17. Instrument Panel Assembly & Cross Beam
1) Tighten the 4 bolts fixing the cross beam and body panel
to the specified torque.
Torque N
⋅m (kgf⋅m/lb⋅ft)
19 (1.9/14)
RUW5A0SH002801
2) A Bolt: Steering Column to Cross Beam
Torque N
⋅m (kgf⋅m/lb⋅ft)
20 (2.0/14)
B Bolt: Pedal Bracket to Cross Beam
Torque N
⋅m (kgf⋅m/lb⋅ft)
15 (1.5/11)
3) C Bolt: Parking Brake Bracket to Cross Beam
Torque N
⋅m (kgf⋅m/lb⋅ft)
15 (1.5/11)
23. Steering Wheel/Steering Cowl
• Tighten the steering wheel fixing nut to the specified
torque.
Torque N
⋅m (kgf⋅m/lb⋅ft)
34 (3.5/25)
CAB 10-35
FLOOR CONSOLE
REMOVAL AND INSTALLATION
A/T Model
Removal Steps
▲ 1. Rear floor console (Bucket seat model
only)
▲ 2. Front floor console
3. 3rd start switch
Installation Steps
3. 3rd start switch
2. Front floor console
1. Rear floor console (Bucket seat model
only)
10-36 CAB
Important Operations - Removal
1. Rear Floor Console (Bucket Seat Model Only)
1) Open the rear console lid and remove 2 screws.
2) Pull out the front part of the rear console at the 2 clip
positions.
2. Front Floor Console
1) Remove the 2 screws.
2) Pull out the rear part of the front console at the 2 clip
positions and disconnect the switch connecter.
3) Remove the front console by pull it out rear-ward.
CAB 10-37
REMOVAL AND INSTALLATION
M/T Model
Removal Steps
▲ 1. Rear floor console (Bucket seat model
only)
2. Shift knob
▲ 3. Front floor console
Installation Steps
3. Front floor console
2. Shift knob
1. Rear floor console (Bucket seat model
only)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст