Isuzu KB P190. Manual — part 896

Engine Management – V6 – Service Operations

Page 6C1-3–60

4 Assembly

Lubricants

Camshaft Position (CMP) Sensor O-ring. . . . . . . . . . ... Engine Oil

Crankshaft Position (CKP) Sensor . . . . . . . . . . . . . Engine Oil

Evaporative Emission (EVAP) Canister Purge Valve
Quick Connect Fitting . . . . . . . . . . . . . . . . . . Engine Oil

Fuel Feed Hose Quick Connect Fitting. . . . . . . . . . . .. Engine Oil

Fuel Injector Seals. . . . . . . . . . . . . . . . . . . . Engine Oil

Heated Oxygen Sensor (HO2S) – All . . . . . . . .. Anti-seize Compound

Ignition Coil Boot . . . . . . . . . . . . . . . . . ...Talcum Powder

Ignition Coil Sealing Rubber . . . . . . . . . . . . . . . .. Engine Oil

Engine Management – V6 – Service Operations

Page 6C1-3–61

5 Torque

Specifications

Fuel Rail Attaching Bolt . . . . . . . . . . . . . . . ... 8.0 – 12.0 Nm

Accelerator Pedal Position Sensor Support Bracket
Attaching Nut. . . . . . . . . . . . . . . . . . . ... 8.5 – 11.5 Nm

Air Cleaner Lower Housing Attaching Bolt. . . . . . . . . 18.0 – 22.0 Nm

Barometric Pressure Sensor Attaching Bolt . . . . . . . . 8.0 – 12.0 Nm

Camshaft Position Sensor Attaching Bolt . . . . . . . . . 8.0 – 12.0 Nm

Crankshaft Position Sensor Attaching Bolt . . . . . . . . .. 8.0 – 12.0 Nm

Engine Coolant Temperature Sensor . . . . . . . . . . . . ... 22.0 Nm

Engine Control Module Attaching Bolt . . . . . . . . . . . 8.0 – 12.0 Nm

Ground Terminal Attaching Screw. . . . . . . . . . . . . . .. 4.5 Nm

Engine Control Module Bracket Assembly
Attaching bolt (6mm Bolt) . . . . . . . . . . . . . . . 8.0 – 12.0 Nm

Engine Control Module Bracket Assembly
Attaching bolt (8mm Bolt) . . . . . . . . . . . . . . .. 20.0 – 25.0 Nm

Engine Oil Pressure Sensor . . . . . . . . . . . . . .. 12.0 – 14.0 Nm

Heated Oxygen Sensor . . . . . . . . . . . . . . . . 40.0 – 50.0 Nm

Ignition Coil Attaching Bolt. . . . . . . . . . . . . . ... 7.0 – 11.0 Nm

Air Intake Duct Retaining Clamp . . . . . . . . . . . . ... 1.5 – 2.5 Nm

Knock Sensor Attaching Bolt . . . . . . . . . . . . . . 21.0 – 25.0 Nm

Mass Air Flow Sensor Attaching Nut . . . . . . . . . . . . 1.8 – 2.2 Nm

Spark Plug. . . . . . . . . . . . . . . . . . . . . 16.0 – 20.0 Nm

Throttle Body Assembly Attaching Bolt. . . . . . . . . . 8.0 – 12.0 Nm

Engine Management – V6 – Service Operations

Page 6C1-3–62

6 Special

Tools

Tool

Number Illustration

Description Tool

Classification

7000086i

Tech 2 scan tool

Used for diagnosis of vehicle electrical
systems.

Previously released.

Mandatory

3588

Digital Multimeter

Previously released as j 39200, 3545
GM.

Available

J 35616

Connector Test Adaptor Kit

Used when carrying out electrical
diagnostic circuit checks.

Previously released.

Desirable

J 34142-a

Un-powered Test Lamp

Previously released as CT-40-C and
also commercially available.

Must have a current draw less than
0.3 A.

Mandatory

J 34730-2C

Injector Test Light

Used to check for power and the
control circuit of the fuel injector, for
proper operation.

Also previously released as
ST- 8329

Mandatory

J 39021

Fuel Injector Coil / Balance Tester

Used in conjunction with a DMM for
testing the fuel injector coil windings
and for injector balance testing.

Previously released

Mandatory

J 44602

Injector Test Adapter

Mandatory

Engine Management – V6 – Service Operations

Page 6C1-3–63

J 41712

Oil Pressure Sensor Socket

Used in conjunction with 3/8” drive
socket equipment to remove / reinstall
oil pressure sensor.

Previously released

Desirable

J 23738-A

Vacuum Pump (20 in. Hg Minimum)

Used for many applications where a
controlled vacuum is required to be
applied.

Previously released and also
commercially available

Mandatory

N/A

Technical Information System (TIS)

CD ROM

Available to Authorised Dealers.

Mandatory