Isuzu KB P190. Manual — part 730
Engine Mechanical – V6
Page 6A1–143
Page 6A1–143
12
Place the left-hand secondary timing chain around the
left-hand camshaft intermediate inner sprocket, with
the bright plated timing chain link (1) aligned with the
access hole (2) in the outer sprocket.
Figure 6A1 – 181
13
Install the left-hand camshaft intermediate sprocket to
the cylinder block.
14
Install the sprocket bolt (1) and tighten to the correct
torque specification.
Camshaft intermediate sprocket
attaching bolt torque specification. . ...58.0 – 72.0 Nm
Figure 6A1 – 182
15
Verify the left-hand secondary timing chain timing
mark alignments (1 to 6)
Figure 6A1 – 183
Engine Mechanical – V6
Page 6A1–144
Page 6A1–144
CAUTION
The left-hand secondary timing chain guide
is marked with the letters LH. Ensure the
correct shoe is used when installing to the
left-hand side in this procedure and that the
letters ‘LH” are facing the front of the vehicle
when installed.
16
Ensure the left-hand secondary timing chain guide is
selected and orientated correctly.
Figure 6A1 – 184
17
Install the left-hand secondary timing chain guide (1).
18
Install the secondary timing chain guide bolts (2) and
tighten to the correct torque specification.
Secondary timing chain guide
attaching bolt torque specification. . ...20.0 – 26.0 Nm
Figure 6A1 – 185
Engine Mechanical – V6
Page 6A1–145
Page 6A1–145
CAUTION
The left-hand secondary timing chain shoe
(2) is marked with the letters LH on the back
face of the timing chain shoe. Ensure the
correct shoe is used when installing to the
left-hand side.
19
Ensure the left-hand secondary timing chain shoe is
selected and orientated correctly.
Figure 6A1 – 186
20
Install the left-hand secondary timing chain shoe (1).
Figure 6A1 – 187
21
Install the left-hand secondary timing chain shoe
bolt (1) and tighten to the correct torque specification.
N O T E
Ensure secondary timing chain shoe is clear of
the left-hand secondary timing chain tensioner
mounting pad, before tightening the attaching
bolt.
Secondary timing chain shoe attaching
bolt torque specification . . . . . . ..20.0 – 26.0 Nm
Figure 6A1 – 188
Engine Mechanical – V6
Page 6A1–146
Page 6A1–146
22
Ensure the left-hand secondary timing chain tensioner
is selected and orientated correctly.
Figure 6A1 – 189
23
Reset the left-hand secondary timing chain tensioner.
N O T E
To reset the tensioner, use a suitably sized flat
blade screwdriver (1) or Tool No. J 45027 (4) to
wind the plunger in a clockwise direction, into
the tensioner shaft (2).
Figure 6A1 – 190
24
Install the tensioner shaft (1) into the left-hand
secondary timing chain tensioner body (2).
Figure 6A1 – 191
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст