Isuzu KB P190. Manual — part 234
ENGINE MECHANICAL 6A – 131
OIL FILTER AND OIL COOLER
DISASSEMBLY
Disassembly Steps
1.
Oil filter cartridge
5.
Body
2.
Bolt
6.
Oil cooler relief valve
3.
Gasket
7.
Regulating
valve
4. Oil
cooler
Disassembly procedure is shown in the illustration above numerical order.
050R300004
6A – 132 ENGINE MECHANICAL
INSPECTION AND REPAIR
Make the necessary adjustments, repairs, and part replacements if excessive wear or damage is discovered during
inspection.
Oil Cooler
Water Leakage at Water Passage
1. Plug one side of the oil cooler water passage.
2. Submerge the oil cooler in water.
3. Apply compressed air (200kPa (2kg/cm
2
/ 28psi)) to
the other side of the oil cooler water passage.
If air bubbles rise to the surface, there is water leakage.
Should be replaced oil cooler assembly.
050RY00002
ENGINE MECHANICAL 6A – 133
REASSEMBLY
Reassembly Steps
1.
Body
5.
Gasket
2.
Regulating valve
6.
Bolt
3.
Oil cooler relief valve
7.
Oil filter cartridge
4. Oil
cooler
Reassembly procedure is shown in the illustration above numerical order.
050R300003
6A – 134 ENGINE MECHANICAL
RTW46ASH001701
1. Body
2. Oil Filter Safety Valve
3. Oil Cooler Safety Valve
Tighten the oil filter
A
and oil cooler
B
relief valve to the
specified torque.
Regulating Valve
N·m(kg·m/lb ft)
A
64 (6.5/48)
4. Oil
Cooler
5. Gasket
6. Bolt
Tighten bolt with gasket and oil cooler to the specified
torque.
Bolt Torque
N·m(kg·m/lb ft)
40 (4.1/30)
7. Oil Filter Cartridge
1) Apply engine oil to the O-ring.
2) Tighten the oil filter cartridge to the specified torque.
Filter wrench: 5-8840-0201-0
Oil Filter Cartride Torque
N·m(kg·m/lb ft)
18 (1.8/13)
050R300006
050RY00004
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст