Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross. Manual — part 447
LIGHTING SYSTEM
8A–9
High Mounted Stoplight Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the high mounted stoplight assembly (1).
D
Remove the cover (2).
D
Remove two screws.
D
Disconnect the connector.
803R200004
Installation
To install, follow the removal steps in the reverse order.
High Mounted Stoplight Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the cover.
3. Remove the high mounted stoplight assembly (1).
D
Remove two screw.
4. Remove the bulb (2).
D
Remove the socket by turning it counterclockwise.
803R200005
Installation
To install, follow the removal steps in the reverse order.
8A–10
LIGHTING SYSTEM
Backup Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the rear combination light assembly.
D
Refer to
Taillight Bulb in this section.
3. Remove the bulb (1).
D
Remove the backup light socket by turning it
counterclockwise.
D
Pull out the bulb from the socket.
803R200007
Installation
To install, follow the removal steps in the reverse order.
Front Turn Signal Light Bulb
Removal and Installation
Refer to
Side Marker Light Bulb in this section.
LIGHTING SYSTEM
8A–11
Rear Turn Signal Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the rear combination light assembly.
D
Refer to
Taillight Bulb in this section.
3. Remove the bulb (1).
D
Remove the rear turn signal light socket by turning it
counterclockwise.
D
Remove the bulb by turning it counterclockwise
while pushing it at the same time.
803R200006
Installation
To install, follow the removal steps in the reverse order.
Dome Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
D
Pull out the bulb.
825RW075
Installation
To install, follow the removal steps in the reverse order.
8A–12
LIGHTING SYSTEM
Map Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
D
Pull out the bulb.
805R200002
Installation
To install, follow the removal steps in the reverse order.
Courtesy Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the lens (2).
3. Remove the bulb (1).
D
Pull out the bulb.
825RW076
Installation
To install, follow the removal steps in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст