Isuzu Trooper (1998-2002 year). Manual — part 1057
8H–14 SECURITY AND LOCKS
Tailgate Lock Assembly (RH)
Tailgate Lock Assembly (RH) and Associated Parts
684RW006
Legend
(1) Tailgate Trim Panel (RH)
(2) Waterproof Sheet
(3) Tailgate Lock Seal
(4) Clip
(5) Screw
(6) Tailgate Lock Assembly (RH)
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel (RH).
D
Refer to the Tailgate Trim Panel (RH) in
Exterior/Interior Trim section.
3. Peel the waterproof sheet off the tailgate panel
carefully and then remove the waterproof sheet.
4. Remove three fixing bolts and then remove the
tailgate lock assembly (RH).
683RW009
SECURITY AND LOCKS
8H–15
5. Remove the tailgate lock seal fixing clip(1) and then
remove the tailgate lock seal(2).
683RW008
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the lock assembly and striker
moving surface.
2. Tighten the tailgate lock assembly fixing bolts to the
specified torque.
Torque: 11 N·m (1.1kg·m/95 lb in)
3. Check that the tailgate lock operates correctly after
installing it.
Tailgate Inside Lock Knob
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel (LH)(2).
D
Refer to the Tailgate Trim Panel (LH) in
Exterior/Interior Trim section.
3. Take care of cushion to turn the lock knob
counterclockwise and then remove the tailgate inside
lock knob(1).
683RW014
Installation
To install, follow the removal steps in the reverse order.
8H–16 SECURITY AND LOCKS
Tailgate Inside Handle
Parts Location
683RW013
Legend
(1) Tailgate Inside Handle
Removal and Installation
D
Refer to the Tailgate Trim Panel (LH) in
Exterior/Interior Trim section.
SECURITY AND LOCKS
8H–17
Tailgate Outside Handle and/or Tailgate Lock Cylinder
Tailgate Outside Handle and/or Tailgate Lock Cylinder and Associated Parts
684RW007
Legend
(1) Tailgate Trim Panel (LH)
(2) Waterproof Sheet
(3) Grommet
(4) Tailgate Lock Cylinder
(5) Tailgate Outside Handle
(6) Key Switch (W/Anti–Theft)
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel.
3. Remove the waterproof sheet.
D
Refer to the Tailgate Lock Assembly (LH) in this
section.
4. Remove the grommet.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст