Isuzu Trooper (1998-2002 year). Manual — part 1056
8H–10 SECURITY AND LOCKS
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Tighten the outside handle fixing bolts to the specified
torque.
Torque: 9 N·m (0.9kg·m/78 lb in)
2. Check that the outside handle operates smoothly.
Rear Door Inside Lock Knob Link
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel(3).
3. Remove the waterproof sheet(2).
D
Refer to the Rear Window Regulator And Glass in
Body Structure section.
4. Remove the fixing screw(4) and disconnect the
locking link at the door lock assembly to remove the
rear door inside lock knob link(1).
655RW009
Installation
To install, follow the removal steps in the reverse order.
SECURITY AND LOCKS
8H–11
Door Inside Lock Knob
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel(1).
D
Refer to the Front & Rear Door Trim Panel in
Exterior/Interior Trim section.
3. Turn the door inside lock knob counterclockwise and
then remove the door inside lock knob (2).
632RS011
Installation
To install, follow the removal steps in the reverse order.
Door Inside Handle
Removal and Installation
D
Refer to the Front & Rear Door Trim Panel in
Exterior/Interior Trim section.
635RS008
8H–12 SECURITY AND LOCKS
Tailgate Lock Assembly (LH)
Tailgate Lock Assembly (LH) and
Associated Parts
684RW008
Legend
(1) Tailgate Trim Panel(LH)
(2) Waterproof Sheet
(3) Tailgate Lock Assembly
Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate trim panel (LH).
D
Refer to the Tailgate Trim Panel (LH) in
Exterior/Interior Trim section.
3. Taking notice of the tailgate harness, peel the
waterproof sheet off the tailgate panel carefully and
then remove the waterproof sheet.
684RS005
SECURITY AND LOCKS
8H–13
4. Disconnect the locking links (arrow marks positions),
remove three fixing screws and then remove the
tailgate lock assembly (LH).
683RW015
Legend
(1) To Inside Lock Knob
(2) To Actuator
(3) To Inside Handle
Installation
To install, follow the removal steps in the reverse order,
noting the following points.
1. Apply chassis grease to the lock assembly and striker
moving surface.
2. Tighten the tailgate lock assembly fixing screws to the
specified torque.
Torque: 7 N·m (0.7kg·m/61 lb in)
3. Check that the tailgate lock operates correctly after
installing it.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст