Nissan Almera Tino V10. Manual — part 132
AT-252
[EXC.F/EURO-OBD]
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
Diagnostic Procedure Without CONSULT-II
ECS0099V
SELF-DIAGNOSTIC PROCEDURE (WITHOUT CONSULT-II)
1.
CHECK O/D OFF INDICATOR LAMP
1.
Start engine and warm it up to normal operating temperature.
2.
Turn ignition switch to “OFF” position.
Wait 5 seconds.
3.
Turn ignition switch to “ACC” position.
4.
Set overdrive control switch to “ON” position.
5.
Move selector lever to “P” position.
6.
Turn ignition switch to “ON” position. (Do not start engine.)
7.
Does O/D OFF indicator lamp come on for about 2 seconds?
Yes or No
Yes
>> GO TO 2.
No
>> GO TO
AT-312, "1. O/D OFF Indicator Lamp Does Not
.
2.
JUDGEMENT PROCEDURE STEP 1
1.
Turn ignition switch to “OFF” position.
2.
Turn ignition switch to “ACC” position.
3.
Move selector lever to “D” position.
4.
Set overdrive control switch to “OFF” position.
5.
Turn ignition switch to “ON” position. (Do not start engine.)
Wait more than 2 seconds after turning ignition switch “ON”.
>> GO TO 3
SAT774B
MCIA0066E
SAT653E
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
AT-253
[EXC.F/EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
3.
JUDGEMENT PROCEDURE STEP 2
1.
Move selector lever to “2” position.
2.
Set overdrive control switch to “ON” position.
>> GO TO 4
4.
JUDGEMENT PROCEDURE STEP 3
1.
Move selector lever to “1” position.
2.
Set overdrive control switch to “OFF” position.
>> GO TO 5
5.
JUDGEMENT PROCEDURE STEP 4
1.
Depress accelerator pedal fully and release it.
>> GO TO 6
6.
CHECK SELF-DIAGNOSIS CODE
Check O/D OFF indicator lamp. Refer to
.
>> DIAGNOSIS END
SAT780B
SAT781B
SAT981F
MCIA0066E
AT-254
[EXC.F/EURO-OBD]
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
JUDGEMENT OF SELF-DIAGNOSIS CODE
O/D OFF indicator lamp:
All judgement flickers are the same.
All circuits that can be confirmed by self-diagnosis are OK.
1st judgement flicker is longer than others.
Revolution sensor circuit is short-circuited or disconnected.
Þ
Go to VEHICLE SPEED SENSOR·A/T (REVOLUTION SEN-
SOR).
Refer to
2nd judgement flicker is longer than others.
Vehicle speed sensor circuit is short-circuited or disconnected.
Þ
Go to DTC VEHICLE SPEED SENSOR·MTR.
Refer to
3rd judgement flicker is longer than others.
Þ
Go to ACCELERATOR PEDAL POSITION (APP) SENSOR.
Refer to
4th judgement flicker is longer than others.
Shift solenoid valve A circuit is short-circuited or disconnected.
Þ
Go to SHIFT SOLENOID VALVE A.
Refer to
5th judgement flicker is longer than others.
Shift solenoid valve B circuit is short-circuited or disconnected.
Þ
Go to SHIFT SOLENOID VALVE B.
Refer to
SCIA0694E
SCIA0695E
SCIA0696E
SCIA0697E
SCIA0698E
SCIA0699E
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
AT-255
[EXC.F/EURO-OBD]
D
E
F
G
H
I
J
K
L
M
A
B
AT
6th judgement flicker is longer than others.
Overrun clutch solenoid valve circuit is short-circuited or discon-
nected.
Þ
Go to OVERRUN CLUTCH SOLENOID VALVE.
Refer to
AT-371
7th judgement flicker is longer than others.
Torque converter clutch solenoid valve circuit is short-circuited or
disconnected.
Þ
Go to TORQUE CONVERTER CLUTCH SOLENOID VALVE.
Refer to
AT-376
8th judgement flicker is longer than others.
A/T fluid temperature sensor is disconnected or TCM power
source circuit is damaged.
Þ
Go to BATT/FLUID TEMP SEN(A/T FLUID TEMP SENSOR
CIRCUIT AND TCM POWER SOURCE).
Refer to
AT-381
9th judgement flicker is longer than others.
Engine speed signal circuit is short-circuited or disconnected.
Þ
Go to ENGINE SPEED SIGNAL.
Refer to
AT-387
O/D OFF indicator lamp:
SCIA0700E
SCIA0701E
SCIA0702E
SCIA0703E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст