Nissan Murano Z51. Manual — part 314
PARKING BRAKE SWITCH
BRC-79
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace parking brake switch. Refer to
.
Parking brake switch
—
Condition
Continuity
Connector
Terminal
E27
1
Ground
When the parking brake switch
is operated.
Existed
When the parking brake switch
is not operated.
Not existed
BRC-80
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
VDC OFF SWITCH
VDC OFF SWITCH
Description
INFOID:0000000005517377
VDC OFF switch can deactivate (turn OFF) the VDC/TCS function by pressing the VDC OFF switch.
Component Function Check
INFOID:0000000005517378
1.
CHECK VDC OFF SWITCH OPERATION
Turn ON/OFF the VDC OFF switch and check that the VDC OFF indicator lamp in the combination meter turns
ON/OFF correctly.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Proceed to diagnosis procedure. Refer to
.
Diagnosis Procedure
INFOID:0000000005517379
1.
CHECK VDC OFF SWITCH
Check VDC OFF switch. Refer to
BRC-81, "Component Inspection"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace VDC OFF switch.
2.
CHECK VDC OFF SWITCH HARNESS
1.
Disconnect ABS actuator and electric unit (control unit) harness connector.
2.
Disconnect VDC OFF switch harness connector.
3.
Check the continuity between VDC OFF switch harness connector and ABS actuator and electric unit
(control unit) harness connector.
4.
Check the continuity between ABS actuator and electric unit (control unit) harness connector and ground.
5.
Check the continuity between VDC OFF switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace error-detected parts.
3.
CHECK COMBINATION METER
1.
Connect ABS actuator and electric unit (control unit) harness connector.
2.
Connect VDC OFF switch harness connector.
3.
Check the indication and operation of combination meter are normal. Refer to
.
Is the inspection result normal?
YES
>> INSPECTION END
ABS actuator and electric unit
(control unit)
VDC OFF switch
Continuity
Connector
Terminal
Connector
Terminal
E36
22
M5
1
Existed
ABS actuator and electric unit (control unit)
—
Continuity
Connector
Terminal
E36
22
Ground
Not existed
VDC OFF switch
—
Continuity
Connector
Terminal
M5
2
Ground
Existed
VDC OFF SWITCH
BRC-81
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
NO
>> Repair or replace combination meter.
Component Inspection
INFOID:0000000005517380
1.
CHECK VDC OFF SWITCH
1.
Turn the ignition switch OFF.
2.
Disconnect VDC OFF switch harness connector.
3.
Check the continuity between VDC OFF switch harness connector terminals.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace VDC OFF switch.
VDC OFF switch
Condition
Condition
Terminal
1 – 2
When VDC OFF switch is hold pressed.
Existed
When releasing VDC OFF switch.
Not existed
BRC-82
< DTC/CIRCUIT DIAGNOSIS >
[VDC/TCS/ABS]
ABS WARNING LAMP
ABS WARNING LAMP
Description
INFOID:0000000005517381
×
: ON –: OFF
Component Function Check
INFOID:0000000005517382
1.
CHECK ABS WARNING LAMP OPERATION
Check that the lamp illuminates for approximately 2 seconds after the ignition switch is turned ON.
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Proceed to diagnosis procedure. Refer to
.
Diagnosis Procedure
INFOID:0000000005517383
1.
CHECK SELF-DIAGNOSIS
Perform self-diagnosis for “ABS” with CONSULT-III.
Is the inspection result normal?
YES
>> Check combination meter. Refer to
MWI-34, "CONSULT-III Function (METER/M&A)"
.
NO
>> Check items displayed by self-diagnosis for “ABS” with CONSULT-III.
Special Repair Requirement
INFOID:0000000005532354
1.
ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION AND CALIBRATION OF DECEL G
SENSOR
After removing/replacing an ABS actuator and electric unit (control unit), be sure to perform the following pro-
cedure.
• Adjustment of steering angle sensor neutral position: Refer to
BRC-9, "ADJUSTMENT OF STEERING
ANGLE SENSOR NEUTRAL POSITION : Description"
.
• Calibration of decel G sensor: Refer to
BRC-10, "CALIBRATION OF DECEL G SENSOR : Description"
.
>> END
Condition
ABS warning lamp
Ignition switch OFF
–
For 2 seconds after turning ignition switch ON
×
2 seconds later after turning ignition switch ON
–
ABS function is malfunctioning.
×
EBD function is malfunctioning.
×
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст