Nissan Murano Z51. Manual — part 831
HA-40
< REMOVAL AND INSTALLATION >
LOW-PRESSURE FLEXIBLE HOSE
4.
Remove the mounting bolt (A), and then remove the low-pres-
sure flexible hose (1) from the low-pressure pipe (2).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable mate-
rial such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant.
JPIIA0533ZZ
HIGH-PRESSURE FLEXIBLE HOSE
HA-41
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
HIGH-PRESSURE FLEXIBLE HOSE
Exploded View
INFOID:0000000005514544
HA-15, "Refrigerant Connection"
.
Removal and Installation
INFOID:0000000005514545
REMOVAL
1.
Use refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2.
Remove the front under cover. Refer to
3.
Remove the mounting bolt (A), and then disconnect the high-
pressure flexible hose (1) from the compressor.
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with
suitable material such as vinyl tape to avoid the entry of air.
1.
High-pressure pipe
2.
O-ring
3.
Condenser assembly
4.
High-pressure flexible hose
5.
Compressor
6.
Low-pressure flexible hose
7.
Low-pressure pipe
8.
Heater & cooling unit assembly
9.
Evaporator pipe assembly
10. Expansion valve
11.
Evaporator
Refer to
JPIIA1257GB
JPIIA0534ZZ
HA-42
< REMOVAL AND INSTALLATION >
HIGH-PRESSURE FLEXIBLE HOSE
4.
Remove the mounting bolt (A), and then remove the high-pres-
sure flexible hose (1) from the condenser pipe assembly (2).
CAUTION:
Cap or wrap the joint of the A/C piping with suitable mate-
rial such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant.
JPIIA0535ZZ
LOW-PRESSURE PIPE
HA-43
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
LOW-PRESSURE PIPE
Exploded View
INFOID:0000000005514546
HA-15, "Refrigerant Connection"
.
Removal and Installation
INFOID:0000000005514547
REMOVAL
1.
Use refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2.
Remove the mounting bolt (A), and then disconnect the low-
pressure pipe (1) from the expansion valve.
CAUTION:
Cap or wrap the joint of the A/C piping and expansion valve
with suitable material such as vinyl tape to avoid the entry
of air.
1.
High-pressure pipe
2.
O-ring
3.
Condenser assembly
4.
High-pressure flexible hose
5.
Compressor
6.
Low-pressure flexible hose
7.
Low-pressure pipe
8.
Heater & cooling unit assembly
9.
Evaporator pipe assembly
10. Expansion valve
11.
Evaporator
Refer to
JPIIA1257GB
JPIIA0536ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст