Nissan Murano Z51. Manual — part 947
INSTRUMENT PANEL ASSEMBLY
IP-17
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
21. Remove center ventilator assembly.
• Remove center ventilator assembly (1) fixing screws (A).
• Pull back center ventilator assembly.
22. Remove display unit.
• Remove display unit (1) fixing screws (A).
• Pull toward the arrow direction.
• Disconnect harness connector.
23. Remove center speaker grille.
• Disengage center speaker grille (1) fixing clips with remover
tool (A).
• Pull up center speaker grille.
24. Remove center speaker. (with BOSE audio) Refer to
AV-543, "Removal and Installation"
.
25. Remove instrument side finisher RH.
• Insert a remover tool (A) into lower space.
• Pull the instrument side finisher RH (1) crosswise.
26. Remove front body side welt RH. Refer to
INT-20, "Removal and Installation"
27. Remove front pillar garnish RH. Refer to
INT-20, "Removal and Installation"
.
: Clip
: Pawl
JMJIA1325ZZ
JMJIA1326ZZ
: Clip
JMJIA1327ZZ
: Pawl
JMJIA1328ZZ
IP-18
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
28. Remove speaker grille RH.
Pull up speaker grille RH (1).
29. Remove front squawker RH. Refer to
AV-45, "Removal and Installation"
.
30. Remove optical sensor. (with XENON headlamp) Refer to
EXL-184, "Removal and Installation"
31. Remove instrument lower panel RH.
• Remove instrument lower panel RH (1) fixing screws (A).
• Open the glove box lid (2).
• Remove instrument lower panel RH fixing screws (B).
• Pull back instrument lower panel RH.
• Disconnect harness connector.
32. Disconnect front passenger air bag module connector. Refer to
.
33. Remove front passenger air bag module fixing bolt. Refer to
34. Remove instrument panel assembly (1) mounting screws (A) and bolt (B).
: Pawl
JMJIA1329ZZ
: Pawl
: Metal clip
JMJIA1330ZZ
JMJIA1331ZZ
INSTRUMENT PANEL ASSEMBLY
IP-19
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
35. Remove instrument panel assembly.
CAUTION:
• Cover center console upper surface with a shop cloth to prevent it from being damaged.
• When removing instrument panel assembly, 2 workers are required so as to prevent it from drop-
ping.
36. Remove the following parts after removing instrument panel assembly.
• Passenger air bag module. Refer to
SR-17, "Removal and Installation"
.
• Ventilator duct. Refer to
VTL-51, "VENTILATOR DUCT : Removal and Installation"
.
• Upper ventilator duct. Refer to
VTL-52, "UPPER VENTILATOR DUCT : Removal and Installation"
.
• Defroster nozzle and side defroster nozzle LH/RH. Refer to
VTL-53, "DEFROSTER NOZZLE AND SIDE
DEFROSTER NOZZLE : Removal and Installation"
.
• Side defroster grille LH/RH. Refer to
VTL-50, "SIDE DEFROSTER GRILLE : Removal and Installation"
• Side ventilator grille LH/RH. Refer to
VTL-48, "SIDE VENTILATOR GRILLE : Removal and Installation"
• Antenna feeder (radio). Refer to
.
• Antenna feeder. Refer to
.
INSTALLATION
Install in the reverse order of removal.
IP-20
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000005518125
1.
Instrument lower cover RH
2.
Instrument lower cover LH
3.
Instrument stay LH
4.
Front console bracket
5.
Console reinforcement
6.
Lower console finisher LH
7.
Console harness
8.
Inside key antenna
9.
Rear console pocket
10. Console mask
11.
Console rear finisher
12. Auxiliary input jacks
13. Center console assembly
14. Socket and bulb
15. Console finisher assembly
16. Cup holder assembly
17. Ashtray
18. Cigarette lighter complete
19. Cigarette lighter ring
20. Socket knob
21. Socket inner case
22. Console mat
23. Console switch finisher
24. DVD player (if equipped)
25. Socket knob
26. Socket inner case
27. Lower console assembly
28. Lower console finisher RH
29. Front console pocket
JMJIA1333ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст