Nissan Murano Z51. Manual — part 946
INSTRUMENT PANEL ASSEMBLY
IP-13
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
Removal and Installation
INFOID:0000000005518124
WORK STEP
When removing instrument panel assembly, combination meter, AV C/U (audio unit), display unit take steps in
the order shown by the number below.
1.
Speaker grille RH
2.
Center speaker grille
3.
Speaker grille LH
4.
Front squawker LH
5.
Instrument side finisher LH
6.
Switch bracket
7.
Instrument lower panel LH
8.
Fuse block lid
9.
Steering column lower cover
10. Cluster lid C
11.
Cluster lid C (lower)
12. Illumination lamp
13. Socket and bulb
14. Glove box striker RH
15. Instrument lower panel RH
16. Socket and bulb
17. Glove box lamp
18. Glove box dumper
19. Instrument side finisher RH
20. Instrument panel assembly
21. Front squawker RH
22. Optical sensor
23. Center speaker
24. Sunload sensor
25. Security indicator
26. Combination meter
27. Cluster lid A
28. Steering column upper cover
29. Instrument stay cover LH
30. Instrument stay cover RH
31. Glove box lid
32. Passenger air bag module
33. Display unit
34. AV C/U (audio unit)
35. Cluster lid D
36. Glove box striker LH
37. Center ventilator assembly
PARTS
INSTRUMENT PANEL
ASSEMBLY
COMBINATION
METER
AV C/U
(audio unit)
DISPLAY UNIT
Instrument side finisher LH
[1]
[1]
Front body side welt LH
[2]
Front pillar garnish LH
[3]
Speaker grille LH
[4]
Front squawker LH
[5]
Instrument lower panel LH
[6]
[2]
Steering wheel
[7]
Steering column cover
[8]
[3]
Combination switch
[9]
Cluster lid A
[10]
[4]
Combination meter
[11]
[5]
Cluster lid C (lower)
[12]
Instrument stay cover LH/RH
[13]
[1]
[1]
Cluster lid D
[14]
[2]
[2]
Cluster lid C
[15]
[3]
[3]
AV C/U (audio unit)
[16]
[4]
[4]
Center ventilator assembly
[17]
[5]
Display unit
[18]
[6]
Center speaker grille
[19]
Center speaker
[20]
Instrument side finisher RH
[21]
Front body side welt RH
[22]
Front pillar garnish RH
[23]
Speaker grille RH
[24]
Front squawker RH
[25]
IP-14
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
[ ]: Number indicates step in removal procedures.
REMOVAL
1.
Remove instrument side finisher LH.
• Insert a remover tool (A) into lower space.
• Pull the instrument side finisher LH (1) crosswise.
2.
Remove front body side welt LH. Refer to
INT-20, "Removal and Installation"
.
3.
Remove front pillar garnish LH. Refer to
INT-20, "Removal and Installation"
4.
Remove speaker grille LH.
Pull up speaker grille LH (1).
5.
Remove front squawker LH. Refer to
AV-45, "Removal and Installation"
.
6.
Remove vehicle security indicator. Refer to
SEC-222, "Removal and Installation"
.
7.
Remove sunload sensor. Refer to
VTL-28, "Removal and Installation"
.
8.
Remove instrument lower panel LH.
• Remove hood opener lever fixing bolts (A).
• Pull back instrument lower panel LH (1).
• Release data link connector (pawl) then remove it from instru-
ment lower panel LH.
• Disconnect harness connectors and aspirator duct.
9.
Remove steering wheel. Refer to
ST-17, "Removal and Installation"
.
Instrument lower panel RH
[26]
Instrument panel assembly
[27]
: Pawl
JMJIA1314ZZ
: Pawl
JMJIA1315ZZ
: Clip
: Metal clip
JMJIA1316ZZ
INSTRUMENT PANEL ASSEMBLY
IP-15
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
10. Remove steering column covers.
• Remove steering column cover fixing screws (A).
• Pull up steering column upper cover (1), and then remove
steering column upper cover.
• Pull down steering column lower cover (2), and then remove
steering column lower cover.
11. Remove combination switch. Refer to
BCS-96, "Removal and Installation"
12. Remove cluster lid A.
• Pull back cluster lid A (1), and disengage clips and pawl.
• Remove cluster lid A.
13. Remove combination meter. Refer to
MWI-103, "Removal and Installation"
.
14. Remove cluster lid C (lower).
• Disengage cluster lid C (lower) (1) fixing clips and pawls with
remover tool (A).
• Pull down cluster lid C (lower).
• Disconnect illumination lamp harness connector.
: Pawl
JMJIA1317ZZ
: Clip
: Pawl
JMJIA1318ZZ
: Clip
: Pawl
JMJIA1319ZZ
IP-16
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
15. Remove instrument stay cover LH.
• Remove instrument stay cover LH (1) fixing screw (A).
• Disengage instrument stay cover LH fixing clips and pawls
with remover tool.
• Pull back and pull up instrument stay cover LH.
• Disconnect push button ignition switch harness connector
16. Remove instrument stay cover RH.
• Remove instrument stay cover RH (1) fixing screw (A).
• Disengage instrument stay cover RH fixing clips and pawls
with remover tool.
• Pull back and pull up instrument stay cover RH.
• Disconnect hazard switch harness connector.
17. Remove cluster lid D.
• Remove cluster lid D (1) fixing screws (A).
• Pull back cluster lid D.
• Disconnect harness connector.
18. Remove cluster lid C.
• Remove cluster lid C (1) fixing screws (A).
• Pull back cluster lid C.
• Disconnect harness connectors.
19. Remove AV C/U. (with BOSE audio)
AV-534, "Removal and Installation"
.
• Remove AV C/U (1) fixing screws (A).
• Pull back AV C/U.
• Disconnect harness connectors.
20. Remove audio unit. (with BASE audio)
AV-41, "Removal and Installation"
.
: Clip
: Pawl
JMJIA1320ZZ
: Clip
: Pawl
JMJIA1321ZZ
: Pawl
JMJIA1322ZZ
JMJIA1323ZZ
JMJIA1324ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст