Nissan Pathfinder (2007 year). Manual — part 97
VEHICLE SECURITY (THEFT WARNING) SYSTEM
BL-69
C
D
E
F
G
H
J
K
L
M
A
B
BL
2007 Pathfinder
Wiring Diagram — VEHSEC —
EIS007PO
WIWA1616E
BL-70
VEHICLE SECURITY (THEFT WARNING) SYSTEM
2007 Pathfinder
WIWA1624E
VEHICLE SECURITY (THEFT WARNING) SYSTEM
BL-71
C
D
E
F
G
H
J
K
L
M
A
B
BL
2007 Pathfinder
WIWA2139E
BL-72
VEHICLE SECURITY (THEFT WARNING) SYSTEM
2007 Pathfinder
WIWA1618E
VEHICLE SECURITY (THEFT WARNING) SYSTEM
BL-73
C
D
E
F
G
H
J
K
L
M
A
B
BL
2007 Pathfinder
WIWA1619E
BL-74
VEHICLE SECURITY (THEFT WARNING) SYSTEM
2007 Pathfinder
Terminals and Reference Values for BCM
EIS007PP
Refer to
BCS-12, "Terminals and Reference Values for BCM"
.
Terminals and Reference Values for IPDM E/R
EIS007PQ
Refer to
PG-27, "Terminals and Reference Values for IPDM E/R"
CONSULT-II Function (BCM)
EIS007PR
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-II START PROCEDURE
Refer to
GI-38, "CONSULT-II Start Procedure"
CONSULT-II APPLICATION ITEM
Data Monitor
Active Test
BCM diagnostic
test item
Diagnostic mode
Description
Inspection by part
WORK SUPPORT
Supports inspections and adjustments. Commands are transmitted to the BCM
for setting the status suitable for required operation, input/output signals are
received from the BCM and received data is displayed.
DATA MONITOR
Displays BCM input/output data in real time.
ACTIVE TEST
Operation of electrical loads can be checked by sending drive signal to them.
SELF-DIAG RESULTS
Displays BCM self-diagnosis results.
CAN DIAG SUPPORT MNTR
The result of transmit/receive diagnosis of CAN communication can be read.
ECU PART NUMBER
BCM part number can be read.
CONFIGURATION
Performs BCM configuration read/write functions.
Monitored Item
Description
DOOR SW-AS
Indicates [ON/OFF] condition of front door switch RH.
DOOR SW-RR
Indicates [ON/OFF] condition of rear door switch RH.
DOOR SW-RL
Indicates [ON/OFF] condition of rear door switch LH.
DOOR SW-DR
Indicates [ON/OFF] condition of front door switch LH.
BACK DOOR SW
Indicates [ON/OFF] condition of back door switch.
TRNK OPN MNTR
Indicates [ON/OFF] condition of glass hatch ajar switch.
ACC ON SW
Indicates [ON/OFF] condition of ignition switch in ACC position.
IGN ON SW
Indicates [ON/OFF] condition of ignition switch in ON position.
KEYLESS UNLOCK
Indicates [ON/OFF] condition of unlock signal from keyfob.
KEYLESS LOCK
Indicates [ON/OFF] condition of lock signal from keyfob.
KEY CYL LK-SW
Indicates [ON/OFF] condition of lock signal from door key cylinder switch.
KEY CYL UN-SW
Indicates [ON/OFF] condition of unlock signal from door key cylinder switch.
CDL UNLOCK SW
Indicates [ON/OFF] condition of unlock signal from lock/unlock switch.
CDL LOCK SW
Indicates [ON/OFF] condition of lock signal from lock/unlock switch.
Test Item
Description
THEFT IND
This test is able to check security indicator lamp operation. The lamp will be turned on when “ON”
on CONSULT-II screen is touched.
HEAD LAMP (HI)
This test is able to check vehicle security lamp operation. The high beam headlamps will be acti-
vated for 0.5 seconds after “ON” on CONSULT-II screen is touched.
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation. The horns will be activated for 0.5 sec-
onds after “ON” on CONSULT-II screen is touched.
VEHICLE SECURITY (THEFT WARNING) SYSTEM
BL-75
C
D
E
F
G
H
J
K
L
M
A
B
BL
2007 Pathfinder
Work Support
Trouble Diagnosis
EIS007PS
WORK FLOW
●
“POWER DOOR LOCK SYSTEM” diagnosis refer to
BL-16, "POWER DOOR LOCK SYSTEM"
●
“REMOTE KEYLESS ENTRY SYSTEM” diagnosis refer to
BL-39, "REMOTE KEYLESS ENTRY SYS-
Test Item
Description
SECURITY ALARM SET
This mode can confirm and change vehicle security alarm ON-OFF setting.
THEFT ALM TRG
The switch which triggered vehicle security alarm is recorded. This mode is able to confirm and
erase the record of vehicle security alarm. The trigger data can be erased by touching “CLEAR”
on CONSULT-II screen.
WIIA0599E
BL-76
VEHICLE SECURITY (THEFT WARNING) SYSTEM
2007 Pathfinder
Preliminary Check
EIS007PT
The system operation is canceled by turning ignition switch to ACC at any step between START and ARMED
in the following flow chart:
After performing preliminary check, go to symptom chart.
WIIA0627E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст