Nissan Titan A60. Manual — part 263
DLK-126
< REMOVAL AND INSTALLATION >
DOOR
5. Remove the door-side hinge nuts and bolts, and the door
assembly.
Installation is in the reverse order of removal.
• Align the front door. Refer to
.
LIIA1727E
FRONT DOOR LOCK
DLK-127
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT DOOR LOCK
Component Structure
INFOID:0000000006179269
Removal and Installation
INFOID:0000000006179270
REMOVAL
1. Remove the front door window regulator. Refer to
GW-18, "Removal and Installation"
.
2. Remove the front door window rear glass run.
1.
Door key cylinder assembly (Driver
side) Outside handle escutcheon
(Passenger side)
2.
Key cylinder assembly (Driver side
only)
3.
Rear gasket
4.
Outside handle bracket
5.
Grommet
6.
Key cylinder rod (Driver side only)
7.
Front door striker
8.
Door lock assembly
9.
Inside handle assembly
10. Inside door lock lever
11. Front gasket
12. Outside handle assembly
AWKIA1719GB
DLK-128
< REMOVAL AND INSTALLATION >
FRONT DOOR LOCK
3. Remove the door side grommet, and the bolt (TORX T30) from
the grommet hole.
4. While pulling the outside handle, remove the door key cylinder
assembly or outside handle escutcheon.
5. Separate the key cylinder rod from the door key cylinder assembly (if equipped).
6. While pulling the outside handle, slide it toward rear of vehicle to
remove.
7. Remove the front gasket (1) and rear gasket (2).
PIIA3553E
LIIA1971E
ALKIA0900ZZ
ALKIA0893ZZ
FRONT DOOR LOCK
DLK-129
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
8. Remove the TORX bolts (T30) (1), and separate the door lock
assembly (2) from the door.
9. While pulling the outside handle bracket, slide it toward the front
of the vehicle to remove it and the door lock assembly as shown.
10. Disconnect the door lock actuator electrical connector.
11. Separate the outside handle cable connection (1) from the out-
side handle bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
To install the key cylinder rod, be sure to rotate the key cylinder rod holder until a click is felt.
Disassembly and Assembly
INFOID:0000000006179271
DOOR KEY CYLINDER ASSEMBLY
Release the door key cylinder escutcheon pawls to remove the door key cylinder.
ALKIA0894ZZ
: Front
ALKIA0895ZZ
ALKIA0896ZZ
1.
Door key cylinder assembly
2.
Key cylinder assembly
3.
Door key cylinder escutcheon
ALKIA0897ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст