Nissan Titan A60. Manual — part 158
BRC-10
< BASIC INSPECTION >
[VDC/TCS/ABS]
INSPECTION AND ADJUSTMENT
(Calibration cannot be done without CONSULT-III)
1.
ALIGN THE VEHICLE STATUS
Stop vehicle with front wheels in straight-ahead position.
>> GO TO 2
2.
PERFORM CALIBRATION OF DECEL G SENSOR
1. On the CONSULT-III screen, touch “WORK SUPPORT” and “DECEL G SEN CALIBRATION” in order.
2. Touch “START”.
3. After approximately 10 seconds, touch “END”.
NOTE:
After approximately 60 seconds, it ends automatically.
4. Turn ignition switch OFF, then turn it ON again.
CAUTION:
Be sure to perform above operation.
>> GO TO 3
3.
CHECK DATA MONITOR
1. Run vehicle with front wheels in straight-ahead position, then stop.
2. Select “DATA MONITOR”. Then make sure “DECEL G SEN” is within
± 0.08G.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Perform calibration of decel G sensor again, GO TO 1
4.
ERASE THE SELF-DIAGNOSIS MEMORY
Erase the self-diagnosis memory of the ABS actuator and electric unit (control unit) and ECM.
• ABS actuator and electric unit (control unit): Refer to
BRC-24, "CONSULT-III Function (ABS)"
.
• ECM: Refer to
.
Are the memories erased?
YES
>> Inspection End
NO
>> Check the items indicated by the self-diagnosis.
VDC
BRC-11
< SYSTEM DESCRIPTION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
SYSTEM DESCRIPTION
VDC
System Diagram
INFOID:0000000006165811
AWFIA0461GB
BRC-12
< SYSTEM DESCRIPTION >
[VDC/TCS/ABS]
VDC
Hydraulic Circuit Diagram
INFOID:0000000006165812
System Description
INFOID:0000000006165813
• Vehicle Dynamics Control system detects driver
′s steering operation amount and brake pedal travel from
steering angle sensor and pressure sensors. Using information from yaw rate/side/decel G sensor and
wheel sensor, VDC judges driving condition (conditions of under steer and over steer) to improve vehicle
driving stability by controlling brake application to 4 wheels and engine output.
• During VDC operation, it informs driver of system operation by flashing SLIP indicator lamp.
• Electrical system diagnosis by CONSULT-III is available.
WFIA0187E
VDC
BRC-13
< SYSTEM DESCRIPTION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
Component Parts Location
INFOID:0000000006165814
1.
Front wheel sensor LH E18
Front wheel sensor RH E117
2.
Delta stroke sensor E114
3.
Active booster E49
4.
Front pressure sensor E31
5.
Rear pressure sensor E32
6.
Brake fluid level switch E21
7.
ABS actuator and electric unit (con-
trol unit) E125
8.
Combination meter M24
9.
Steering angle sensor M17 (view
with steering wheel removed)
AWFIA0740ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст