Nissan Titan A60. Manual — part 7
ADP-18
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
DETAIL FLOW
Item
Request status
Ignition position
ON
Switch inputs
• Power seat switch
• Pedal adjusting switch
• Door mirror control switch
• Set switch
• Seat memory switch
OFF
(Not operated)
A/T selector lever
P position
Order
Input
Output
Control unit condition
1
Memory switch
—
The memory switch signal is inputted to the automatic drive positioner
control unit when memory switch 1 or 2 is operated.
Memory switch signal is input to driver seat control unit via UART
communication.
2
—
Motors
(seat, pedal adjusting,
door mirror)
Driver seat control unit operates each motor of seat when it recogniz-
es the memory switch pressed for 0.5 second or more and requests
each motor operation to automatic drive positioner control unit via
UART communication. The automatic drive positioner control unit op-
erates each motor.
Memory switch Indica-
tor
Driver seat control unit requests the flashing of memory indicator to
automatic drive positioner control unit via UART communication while
either of the motors is operating. The automatic drive positioner con-
trol unit illuminates the memory indicator.
3
Sensors
(seat, pedal adjust-
ing, door mirror)
—
Driver seat control unit judges the operating seat position with each
seat sensor input. The positions of the adjustable pedals and outside
mirror are monitored with each sensor signal that is input from auto
drive positioner control unit via UART communication. Driver seat
control unit stops the operation of each motor when each part reach-
es the recorded address.
4
—
Memory switch Indica-
tor
Driver seat control unit requests the illumination of memory indicator
to auto drive positioner control unit via UART communication after all
motors stop. The auto driving positioner control unit illuminates the
memory indicator for 5 seconds.
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY FUNCTION : Component Parts Location
INFOID:0000000006163446
MEMORY FUNCTION : Component Description
INFOID:0000000006163447
CONTROL UNITS
ALJIA0514ZZ
1.
A. Automatic drive positioner control
unit M33, M34
B. Pedal adjusting motor assembly
E109, E110
C. A/T shift selector (column shift)
M68
2.
A. Steering column
B. Key switch and key lock solenoid
M27
C. BCM M18, M19, M20 (view with
instrument panel removed)
3.
A. Door mirror remote control switch
D10
B. Seat memory switch D5
4.
Pedal adjusting switch M96
5.
A. Door mirror LH D4, RH D107
B. Front door switch LH B8
6.
A. A/T selector lever (floor shift)
B. A/T shift selector (park position
switch) M203 (King Cab), M204
(Crew Cab)
7.
A. Sliding motor LH B204 (driver seat
view), reclining motor LH B205, lift-
ing motor (front) B206, lifting motor
(rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
Item
Function
Driver seat control unit
• The address of each part is recorded.
• Operates each motor of seat to the registered position.
• Requests the operations of pedal assembly and door mirror to automatic drive po-
sitioner control unit.
Automatic drive positioner control unit
Operates the pedal adjusting motor and door mirror with the instructions from the
driver seat control.
ADP-20
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
EXIT ASSIST FUNCTION
EXIT ASSIST FUNCTION : System Diagram
INFOID:0000000006163448
Item
Function
Memory switch 1/2
The registration and memory function can be performed with its operation.
Item
Function
Door mirror sensor (LH/RH)
Detect the up/down and left/right position of outside mirror face.
Pedal adjusting sensor
Detect the forward/backward position of pedal assembly.
Lifting sensor (front)
Detect the up/down position of seat lifting (front).
Lifting sensor (rear)
Detect the up/down position of seat lifting (rear).
Reclining sensor
Detect the tilt of seatback.
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Door mirror motor (LH/RH)
Move the outside mirror face upward/downward and left/right.
Pedal adjusting motor
Move the pedal assembly forward/backward.
Lifting motor (front)
Move the seat lifter (front) upward/downward.
Lifting motor (rear)
Move the seat lifter (rear) upward/downward.
Reclining motor
Tilt and raise up the seatback.
Sliding motor
Slide the seat forward/backward.
Memory indicator
Illuminates or blinks according to the registration/operation status.
ALJIA0188GB
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
EXIT ASSIST FUNCTION : System Description
INFOID:0000000006163449
OUTLINE
When exiting, if the conditions are satisfied, the seat is moved backward from normal sitting position.
The seat slide amount at entry/exit operation can be changed.
NOTE:
• This function is set to OFF before delivery (initial setting).
• Further information for the system setting procedure. Refer to Owner’s Manual.
OPERATION PROCEDURE
1. Open the driver door with ignition switch in OFF position.
2. Front seat LH will move to the exiting position.
OPERATION CONDITION
Satisfy all of the following items. The exit assist function is not performed if these items are not satisfied.
DETAIL FLOW
Item
Request status
Ignition switch
OFF
System setting [Entry/exit assist function]
ON
Initialization
Done
Switch inputs
• Power seat switch
• Pedal adjusting switch
• Door mirror remote control switch
• Set switch
• Seat memory switch
OFF
(Not operated)
A/T selector lever
P position
Order
Input
Output
Control unit condition
1
Front door switch LH
—
Driver seat control unit receives front door switch LH signal (open)
from BCM via CAN communication.
2
—
Motor (seat sliding)
Driver seat control unit operates the seat sliding motor, which recog-
nizes that the front door LH is opened with ignition switch OFF.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст