Nissan Titan A60. Manual — part 8
ADP-22
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
EXIT ASSIST FUNCTION : Component Parts Location
INFOID:0000000006163450
EXIT ASSIST FUNCTION : Component Description
INFOID:0000000006163451
CONTROL UNITS
INPUT PARTS
ALJIA0514ZZ
1.
A. Automatic drive positioner control
unit M33, M34
B. Pedal adjusting motor assembly
E109, E110
C. A/T shift selector (column shift)
M68
2.
A. Steering column
B. Key switch and key lock solenoid
M27
C. BCM M18, M19, M20 (view with
instrument panel removed)
3.
A. Door mirror remote control switch
D10
B. Seat memory switch D5
4.
Pedal adjusting switch M96
5.
A. Door mirror LH D4, RH D107
B. Front door switch LH B8
6.
A. A/T selector lever (floor shift)
B. A/T shift selector (park position
switch) M203 (King Cab), M204
(Crew Cab)
7.
A. Sliding motor LH B204 (driver seat
view), reclining motor LH B205, lift-
ing motor (front) B206, lifting motor
(rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
Item
Function
Driver seat control unit
Operates the seat sliding motor for a constant amount.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Front door LH: OPEN/CLOSE
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-23
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
Switches
Sensors
OUTPUT PARTS
ENTRY ASSIST FUNCTION
ENTRY ASSIST FUNCTION : System Diagram
INFOID:0000000006163452
ENTRY ASSIST FUNCTION : System Description
INFOID:0000000006163453
OUTLINE
The seat is in the exiting position when either following condition (A or B) is satisfied, the seat returns from
exiting position to the previous driving position.
NOTE:
• This function is set to OFF before delivery (initial setting).
• Further information for the system setting procedure. Refer to Owner’s Manual.
OPERATION PROCEDURE
1. A: Turn the ignition switch ON.
B: Turn the ignition switch from OFF to ACC after closing the driver door.
2. Front seat LH will return from the exiting position to entry position.
OPERATION CONDITION
Item
Function
Front door switch LH
Detect front door LH open/close status.
Item
Function
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Sliding motor
Slide the seat forward/backward.
ALJIA0188GB
ADP-24
< SYSTEM DESCRIPTION >
AUTOMATIC DRIVE POSITIONER SYSTEM
Satisfy all of the following items. The entry assist function is not performed if these items are not satisfied.
DETAIL FLOW
ENTRY ASSIST FUNCTION : Component Parts Location
INFOID:0000000006163454
Item
Request status
Seat
The vehicle is not moved after performing the
exit assist function.
Switch inputs
• Power seat switch
• Pedal adjusting switch
• Door mirror control switch
• Set switch
• Memory switch
OFF
(Not operated)
A/T selector lever
P position
Order
Input
Output
Control unit condition
1
Door switch/Ignition
switch
—
Driver seat control unit receives the signals of ignition switch signal
and front door switch from BCM via CAN communication.
2
—
Motor (sliding)
Driver seat control unit operates the sliding motor when the operating
conditions are satisfied.
Sensor (sliding)
—
Sensor monitors the operating positions of seat and then stops the
operation of motor when seat reaches the recorded address.
ALJIA0514ZZ
AUTOMATIC DRIVE POSITIONER SYSTEM
ADP-25
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
ENTRY ASSIST FUNCTION : Component Description
INFOID:0000000006163455
CONTROL UNITS
INPUT PARTS
Switches
Sensors
OUTPUT PARTS
1.
A. Automatic drive positioner control
unit M33, M34
B. Pedal adjusting motor assembly
E109, E110
C. A/T shift selector (column shift)
M68
2.
A. Steering column
B. Key switch and key lock solenoid
M27
C. BCM M18, M19, M20 (view with
instrument panel removed)
3.
A. Door mirror remote control switch
D10
B. Seat memory switch D5
4.
Pedal adjusting switch M96
5.
A. Door mirror LH D4, RH D107
B. Front door switch LH B8
6.
A. A/T selector lever (floor shift)
B. A/T shift selector (park position
switch) M203 (King Cab), M204
(Crew Cab)
7.
A. Sliding motor LH B204 (driver seat
view), reclining motor LH B205, lift-
ing motor (front) B206, lifting motor
(rear) B207
B. Driver seat control unit B202,
B203
C. Power seat switch LH B208
Item
Function
Driver seat control unit
According to the ignition signal and front door switch LH signal from BCM,
• Operates the seat sliding motor for a constant amount.
BCM
Recognizes the following status and transmits it to the driver seat control unit via
CAN communication.
• Front door LH: OPEN/CLOSE
• Ignition switch position: ACC/ON
Item
Function
Front door switch LH
Detect front door LH open/close status.
Item
Function
Sliding sensor
Detect the front/rear position of seat.
Item
Function
Sliding motor
Slide the seat forward/backward.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст