Nissan Titan A60. Manual — part 487
EXL-3
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
PARKING, LICENSE PLATE AND TAIL
LAMPS ARE NOT TURNED ON . . . . . ..
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
BOTH SIDE FRONT FOG LAMPS ARE NOT
TURNED ON . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
PRECAUTION . . . . . . . . . . .
PRECAUTIONS . . . . . . . . . . . .
Precaution for Work . . . . . . . . . . . ..
REMOVAL AND INSTALLATION . . . .
HEADLAMP . . . . . . . . . . . . . ..
Aiming Adjustment . . . . . . . . . . . .
Bulb Replacement . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . ...
Disassembly and Assembly . . . . . . . . ..
AUTO LIGHT SYSTEM . . . . . . . . .
Removal and Installation . . . . . . . . . ...
FRONT FOG LAMP . . . . . . . . . . ..
Aiming Adjustment . . . . . . . . . . . . .
Bulb Replacement . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . ...
LIGHTING & TURN SIGNAL SWITCH . . ...
Removal and Installation . . . . . . . . . ...
HAZARD SWITCH . . . . . . . . . . ..
Removal and Installation . . . . . . . . . ...
PUDDLE LAMP . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
Bulb Replacement . . . . . . . . . . . . .
HIGH-MOUNTED STOP LAMP . . . . . ..
Bulb Replacement . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . ...
REAR COMBINATION LAMP . . . . . . .
Bulb Replacement . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . ...
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . ..
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . ...
Headlamp . . . . . . . . . . . . . . . ..
EXL-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000006178982
OVERALL SEQUENCE
AWLIA1661GB
DIAGNOSIS AND REPAIR WORKFLOW
EXL-5
< BASIC INSPECTION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
DETAILED FLOW
1.
INTERVIEW FOR MALFUNCTION
Find out what the customer's concerns are.
>> GO TO 2.
2.
SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3.
3.
BASIC INSPECTION
Check the operation of each part. Check that any concerns occur other than those mentioned in the customer
interview.
>> GO TO 4.
4.
SELF-DIAGNOSIS WITH CONSULT-III
Perform the self diagnosis with CONSULT-III. Check that any DTC is detected.
Is any DTC detected?
YES
>> GO TO 5.
NO
>> GO TO 6.
5.
TROUBLE DIAGNOSIS BY DTC
Perform the trouble diagnosis for the detected DTC. Specify the malfunctioning part.
>> GO TO 9.
6.
FAIL-SAFE ACTIVATION CHECK
Determine if the customer's concern is related to fail-safe activation.
Does the fail-safe activate?
YES
>> GO TO 7.
NO
>> GO TO 8.
7.
SYSTEM DIAGNOSIS
Perform the system diagnosis for the system in which the fail-safe activates. Specify the malfunctioning part.
>> GO TO 9.
8.
SYMPTOM DIAGNOSIS
Perform the symptom diagnosis. Specify the malfunctioning part.
>> GO TO 9.
9.
MALFUNCTION PART REPAIR
Repair or replace the malfunctioning part.
>> GO TO 10.
10.
REPAIR CHECK (SELF-DIAGNOSIS WITH CONSULT-III)
Perform the self diagnosis with CONSULT-III. Verify that no DTCs are detected. Erase all DTCs detected prior
to the repair. Verify that DTC is not detected again.
Is any DTC detected?
EXL-6
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
YES
>> GO TO 5.
NO
>> GO TO 11.
11.
REPAIR CHECK (OPERATION CHECK)
Check the operation of each part.
Does it operate normally?
YES
>> Inspection End.
NO
>> GO TO 3.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст