Nissan Titan A60. Manual — part 465
INTAKE VALVE TIMING CONTROL
EM-45
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
INTAKE VALVE TIMING CONTROL
Intake Valve Timing Control Solenoid Valve (LH)
INFOID:0000000006628776
REMOVAL
1. Remove engine room cover using power tool. Refer to
EM-24, "Removal and Installation"
.
2. Remove air duct and resonator assembly. Refer to
EM-25, "Removal and Installation"
3. Remove drive belt. Refer to
EM-13, "Removal and Installation"
.
4. Disconnect Intake valve timing control solenoid valve connector (LH).
5. Remove Intake valve timing control solenoid valve (LH) (2) and
O-ring (3) from Intake valve timing control solenoid valve cover
(LH) (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring for the Intake valve timing control solenoid valve with a new one, then lubricate O-
ring with engine oil before installing.
Intake Valve Timing Control Solenoid Valve (RH)
INFOID:0000000006628777
REMOVAL
1. Remove drive belt. Refer to
EM-13, "Removal and Installation"
.
2. Disconnect Intake valve timing control solenoid valve connector (RH).
3. Remove Intake valve timing control solenoid valve (RH) (3) and
O-ring (2) from Intake valve timing control solenoid valve cover
(RH) (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring for the Intake valve timing control solenoid valve with a new one, then lubricate O-
ring with engine oil before installing.
AWBIA0145ZZ
Intake valve timing control
solenoid valve bolt
: 9.6 N·m (0.98 kg-m, 85 in-lb)
AWBIA0144ZZ
Intake valve timing control
solenoid valve bolt
: 9.6 N·m (0.98 kg-m, 85 in-lb)
EM-46
< REMOVAL AND INSTALLATION >
INTAKE VALVE TIMING CONTROL
Intake Valve Timing Control Position Sensor (LH)
INFOID:0000000006628778
REMOVAL
1. Remove engine room cover using power tool. Refer to
EM-24, "Removal and Installation"
.
2. Remove air duct and resonator assembly. Refer to
EM-25, "Removal and Installation"
3. Disconnect intake valve timing control position sensor connector (LH).
4. Remove intake valve timing control position sensor (LH) (1) and
O-ring (2) from Intake valve timing control solenoid valve cover
(LH) (3).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring for the intake valve timing control position sensor with a new one, then lubricate O-
ring with engine oil before installing.
Intake Valve Timing Control Position Sensor (RH)
INFOID:0000000006628779
REMOVAL
1. Remove engine room cover using power tool. Refer to
EM-24, "Removal and Installation"
.
2. Disconnect intake valve timing control position sensor connector (RH).
3. Remove intake valve timing control position sensor (RH) (1) and
O-ring (2) from Intake valve timing control solenoid valve cover
(RH) (3).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring for the intake valve timing control position sensor with a new one, then lubricate O-
ring with engine oil before installing.
Camshaft Position Sensor (PHASE)
INFOID:0000000006628780
REMOVAL
1. Remove engine room cover using power tool. Refer to
EM-24, "Removal and Installation"
.
2. Remove air duct and resonator assembly. Refer to
EM-25, "Removal and Installation"
3. Disconnect camshaft position sensor connector.
AWBIA0141ZZ
Intake valve timing control position sensor bolt
: 9.6 N·m (0.98 kg-m, 85 in-lb)
AWBIA0143ZZ
Intake valve timing control position sensor bolt
: 9.6 N·m (0.98 kg-m, 85 in-lb)
INTAKE VALVE TIMING CONTROL
EM-47
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
4. Remove camshaft position sensor (2) and O-ring (3) from Intake
valve timing control solenoid valve cover (LH) (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring for the camshaft position sensor with a new one, then lubricate O-ring with engine
oil before installing.
AWBIA0142ZZ
Camshaft position sensor bolt
: 9.6 N·m (0.98 kg-m, 85 in-lb)
EM-48
< REMOVAL AND INSTALLATION >
TIMING CHAIN COVER
TIMING CHAIN COVER
Removal and Installation
INFOID:0000000006596402
REMOVAL
NOTE:
For exploded view and torque specifications, Refer to
.
1. Remove the upper oil pan. Refer to
EM-33, "Removal and Installation"
.
2. Remove variable timing control solenoids.
3. Remove intake valve timing control sensors.
4. Remove the crankshaft driven fan pulley and pulley bracket.
5. Remove the drive belt auto tensioner and idler pulley.
6. Remove the intake valve timing control solenoid valve cover
(RH) (A) and intake valve timing control solenoid valve cover
(LH) (B) as follows:
a. Loosen and remove the bolts in the reverse of order as shown.
b. Cut the liquid gasket and remove the covers using Tool.
CAUTION:
Do not damage mating surfaces.
7. Obtain compression TDC of No. 1 cylinder as follows:
a. Turn the crankshaft pulley clockwise to align the TDC identifica-
tion notch (without paint mark) with the timing indicator on the
front cover.
8. Remove access cover
9. Loosen the crankshaft pulley bolts using Tool to secure the crankshaft.
a. Remove the crankshaft pulley from the crankshaft using suitable
tool.
• Set the bolts in the two bolt holes [M6 x 1.0 mm (0.04 in)] on
the front surface.
NOTE:
The dimension between the centers of the two bolt holes is 61
mm (2.40 in).
Tool number
: KV10111100 (J-37228)
WBIA0798E
KBIA2476E
Tool number
( — ) J-47245
KBIA2477E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст