Nissan Pathfinder (2008 year). Manual — part 625
HEATER CORE
VTL-25
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
HEATER CORE
Component
INFOID:0000000001672967
Front Heater and Cooling Unit Assembly
Rear Heater and Cooling Unit Assembly
LJIA0167E
1.
Front heater core and evaporator pipe
bracket
2.
Front heater core
3.
Front heater and cooling unit assembly
4.
Front heater core cover
LJIA0168E
1.
Rear heater and cooling unit assembly
2.
Rear blower motor
3.
Rear heater core bracket
4.
Rear heater core
VTL-26
< ON-VEHICLE REPAIR >
HEATER CORE
Removal and Installation
INFOID:0000000001672968
FRONT HEATER CORE
Removal
1.
Remove the front heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
.
2.
Remove the three screws and remove the front heater core cover.
3.
Remove the front heater core and evaporator pipe bracket.
4.
Remove the front heater core.
NOTE:
If the in-cabin microfilters are contaminated from coolant leaking
from the front heater core, replace the in-cabin microfilters with
new ones before installing the new front heater core.
Installation
Installation is in the reverse order of removal.
REAR HEATER CORE
Removal
1.
Partially drain the engine cooling system. Refer to
CO-12, "Changing Engine Coolant"
(VK56DE).
2.
Remove the rear heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
3.
Remove the rear heater core bracket.
4.
Remove the heater core.
Installation
Installation is in the reverse order of removal.
LJIA0134E
INTAKE DOOR MOTOR
VTL-27
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
INTAKE DOOR MOTOR
Removal and Installation
INFOID:0000000001672969
Intake Door Motor - Front Heater and Cooling Unit Assembly
REMOVAL
1.
Remove the front heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
.
2.
Remove the steering member from the front heater and cooling unit assembly.
3.
Disconnect the intake door motor electrical connector.
4.
Remove the three screws and remove the intake door motor.
INSTALLATION
Installation is in the reverse order of removal.
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control
5.
Air mix door motor (driver)
6.
Mode door motor
VTL-28
< ON-VEHICLE REPAIR >
MODE DOOR MOTOR
MODE DOOR MOTOR
Removal and Installation
INFOID:0000000001672970
Mode Door Motor - Front Heater and Cooling Unit Assembly
REMOVAL
1.
Remove the instrument panel side finisher. Refer to
.
2.
Remove the lower instrument cover. Refer to
.
3.
Disconnect the mode door motor electrical connector.
4.
Remove the three screws and remove the mode door motor.
INSTALLATION
Installation is in the reverse order of removal.
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control
5.
Air mix door motor (driver)
6.
Mode door motor
AIR MIX DOOR MOTOR
VTL-29
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
AIR MIX DOOR MOTOR
Component
INFOID:0000000001672971
Air Mix Door Motors - Front Heater and Cooling Unit Assembly
Removal and Installation
INFOID:0000000001672972
FRONT AIR MIX DOOR MOTOR (DRIVER)
Removal
1.
Remove the instrument panel side finisher. Refer to
2.
Remove the lower instrument panel RH. Refer to
3.
Disconnect the air mix door motor electrical connector.
4.
Remove the three screws and remove the air mix door motor.
Installation
Installation is in the reverse order of removal.
FRONT AIR MIX DOOR MOTOR (PASSENGER)
Removal
1.
Remove the front heater and cooling unit assembly. Refer to
VTL-18, "Removal and Installation"
.
2.
Remove the steering member from the front heater and cooling unit assembly.
3.
Disconnect the air mix door motor electrical connector.
4.
Remove the three screws and remove the air mix door motor.
Installation
Installation is in the reverse order of removal.
REAR AIR MIX DOOR MOTOR
LBIA0415E
1.
Front heater and cooling unit assembly
2.
Intake door motor
3.
Air mix door motor (passenger)
4.
Variable blower control
5.
Air mix door motor (driver)
6.
Mode door motor
VTL-30
< ON-VEHICLE REPAIR >
AIR MIX DOOR MOTOR
Removal
1.
Remove the luggage side lower finisher RH. Refer to
.
2.
Disconnect the rear air mix door motor electrical connector.
3.
Remove the three screws and remove the rear air mix door
motor.
Installation
Installation is in the reverse order of removal.
WJIA1134E
DUCTS AND GRILLES
VTL-31
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
J
K
L
M
A
B
VTL
N
O
P
DUCTS AND GRILLES
Component
INFOID:0000000001672975
Ducts - Front Heater and Cooling Unit Assembly
WJIA1260E
1.
Defroster nozzle
2.
LH side demister duct
3.
LH ventilator duct
4.
RH side demister duct
5.
RH ventilator duct
6.
Center ventilator duct
VTL-32
< ON-VEHICLE REPAIR >
DUCTS AND GRILLES
Ducts - Rear Heater and Cooling Unit Assembly
7.
Front heater and cooling unit assembly
8.
Floor connector duct grilles
9.
Floor connector duct
10. Front floor ducts
11.
Rear floor ducts
LJIA0156E
1.
Side rear floor duct
2.
Rear heater and cooling unit assembly
3.
Rear lower overhead duct
4.
Rear upper overhead duct
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст