Nissan Pathfinder (2008 year). Manual — part 77
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-17
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
BCM : CONSULT-III Function (BCM - BCM)
INFOID:0000000001712663
WORK SUPPORT
DOOR LOCK
DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)
INFOID:0000000001712664
WORK SUPPORT
DATA MONITOR
1: With remote keyless entry system
2: With Intelligent Key
ACTIVE TEST
REAR WINDOW DEFOGGER
Item
Description
RESET SETTING VALUE
Return a value set with WORK SUPPORT of each system to a default value in factory shipment.
Work Item
Description
DOOR LOCK-UNLOCK SET
• ON
• OFF
ANTI-LOCK OUT SET
• ON
• OFF
Monitor Item
[Unit}
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position
KEY ON SW [ON/OFF]
Indicates condition of key switch
CDL LOCK SW [ON/OFF]
Indicates condition of door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Indicates condition of door lock and unlock switch
DOOR SW-DR [ON/OFF]
Indicates condition of front door switch LH
DOOR SW-AS [ON/OFF]
Indicates condition of front door switch RH
DOOR SW-RR [ON/OFF]
Indicates condition of rear door switch RH
DOOR SW-RL [ON/OFF]
Indicates condition of rear door switch LH
BACK DOOR SW [ON/OFF]
Indicates condition of back door switch
KEY CYL LK-SW [ON/OFF]
Indicates condition of lock signal from door key cylinder switch
KEY CYL UN-SW [ON/OFF]
Indicates condition of unlock signal from door key cylinder switch
KEYLESS LOCK
1
[ON/OFF]
Indicates condition of lock signal from keyfob
KEYLESS UNLOCK
1
[ON/OFF]
Indicates condition of unlock signal from keyfob
I-KEY LOCK
2
[ON/OFF]
Indicates condition of lock signal from Intelligent Key
I-KEY UNLOCK
2
[ON/OFF]
Indicates condition of unlock signal from Intelligent Key
Test Item
Description
DOOR LOCK
This test is able to check door lock operation [ALL LOCK/ALL UNLOCK/DR UNLOCK/
OTHER UNLOCK].
TRUNK/BACK DOOR
This test is able to check trunk/back door lock operation [LOCK (SET)/UNLOCK (RE-
LEASE)].
BCS-18
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER)
INFOID:0000000001712665
DATA MONITOR
BUZZER
BUZZER : CONSULT-III Function (BCM - BUZZER)
INFOID:0000000001712666
DATA MONITOR
ACTIVE TEST
INT LAMP
INT LAMP : CONSULT-III Function (BCM - INT LAMP)
INFOID:0000000001712667
WORK SUPPORT
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position
IGN ACC SW [ON/OFF]
Indicates condition of ignition switch in ACC position
REAR DEF SW [ON/OFF]
Displays “Press (ON)/other (OFF)” status determined with the rear window defogger switch
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judged by ignition power supply input
KEY ON SW [ON/OFF]
Key switch status
DOOR SW -DR [ON/OFF]
Front door switch (driver side) status judged by BCM
LIGHT SW 1ST [ON/OFF]
Lighting switch status judged by the lighting switch signal read with combination switch reading func-
tion
BUCKLE SW [ON/OFF]
Seat belt buckle switch status
Test Item
Description
LIGHT WARN ALM
The light reminder warning operation can be checked by operating the relevant function (On/Off).
IGN KEY WARN ALM
The key reminder warning operation can be checked by operating the relevant function (On/Off).
SEAT BELT WARN TEST
The seat belt warning operation can be checked by operating the relevant function (On/Off).
DOOR WARNING IND
The door open warning operation can be checked by operating the relevant function (On/Off).
JPLIA0093GB
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-19
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
* : Initial setting
DATA MONITOR
1: With remote keyless entry
2: With Intelligent Key
ACTIVE TEST
Work Item
Setting item
Setting
SET I/L D-UNLCK INTCON
ON*
With the interior room lamp timer function
OFF
Without the interior room lamp timer function
ROOM LAMP ON TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual brightening time.
MODE 2*
1 sec.
MODE 3
2 sec.
MODE 4
3 sec.
MODE 5
0 sec.
ROOM LAMP OFF TIME SET
MODE 1
0.5 sec.
Sets the interior room lamp gradual dimming time.
MODE 2
1 sec.
MODE 3
2 sec.
MODE 4*
3 sec.
MODE 5
0 sec.
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judges from IGN signal (ignition power supply)
KEY ON SW [ON/OFF]
The switch status input from key switch
DOOR SW-DR [ON/OFF]
The switch status input from front door switch LH
DOOR SW-AS [ON/OFF]
The switch status input from front door switch RH
DOOR SW-RR [ON/OFF]
The switch status input from rear door switch RH
DOOR SW- RL [ON/OFF]
The switch status input from rear door switch LH
BACK DOOR SW [ON/OFF]
The switch status input from back door switch
KEY CYL LK-SW [ON/OFF]
Lock switch status input from door lock and unlock switch
KEY CYL UN-SW [ON/OFF]
Lock switch status input from door lock and unlock switch
CDL LOCK SW [ON/OFF]
Lock switch status input from door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Unlock switch status input from door lock and unlock switch
KEYLESS LOCK
1
[ON/OFF]
Lock signal status received from remote keyless entry receiver (integrated in the
BCM)
KEYLESS UNLOCK
1
[ON/OFF]
Unlock signal status received from remote keyless entry receiver (integrated in the
BCM)
I-KEY LOCK
2
[ON/OFF]
Lock signal status received from Intelligent Key unit by CAN communication
I-KEY UNLOCK
2
[ON/OFF]
Unlock signal status received from Intelligent Key unit by CAN communication
Test Item
Operation
Description
INT LAMP
ON
Outputs the interior room lamp control signal to turn the interior room lamps ON.
OFF
Stops the interior room lamp control signal to turn the interior room lamps OFF.
IGN ILLUM
ON
Outputs the ignition keyhole illumination control signal to turn the ignition keyhole il-
lumination lamp ON.
OFF
Stops the ignition keyhole illumination control signal to turn the ignition keyhole illu-
mination lamp OFF.
BCS-20
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
MULTIREMOTE ENT
MULTIREMOTE ENT : CONSULT-III Function (BCM - MULTIREMOTE ENT)
INFOID:0000000001712668
WORK SUPPORT
DATA MONITOR
ACTIVE TEST
HEADLAMP
HEADLAMP : CONSULT-III Function (BCM - HEAD LAMP)
INFOID:0000000001712669
WORK SUPPORT
STEP LAMP TEST
ON
Outputs the step lamp control signal to turn the step lamps ON.
OFF
Stops the step lamp control signal to turn the step lamps OFF.
LUGGAGE LAMP TEST
ON
Outputs the luggage lamp control signal to turn the luggage lamp ON.
OFF
Stops the luggage lamp control signal to turn the luggage lamp OFF.
Test Item
Operation
Description
Work Item
Description
HAZARD LAMP SET
Answer back function (hazard) mode can be changed in this mode.
For the detail of the setting, refer to
BCS-22, "FLASHER : CONSULT-III Function (BCM -
.
Monitor Item
[Unit}
Condition
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position
KEY SW [ON/OFF]
Indicates condition of key switch
KEYLESS LOCK [ON/OFF]
Indicates condition of lock signal from keyfob
KEYLESS UNLOCK [ON/OFF]
Indicates condition of unlock signal from keyfob
DOOR SW-DR [ON/OFF]
Indicates condition of front door switch LH
DOOR SW-AS [ON/OFF]
Indicates condition of front door switch RH
DOOR SW-RR [ON/OFF]
Indicates condition of rear door switch RH
DOOR SW-RL [ON/OFF]
Indicates condition of rear door switch LH
BACK DOOR SW [ON/OFF]
Indicates condition of back door switch
CDL LOCK SW [ON/OFF]
Indicates condition of door lock and unlock switch
CDL UNLOCK SW [ON/OFF]
Indicates condition of door lock and unlock switch
RKE LOCK AND UNLOCK
This item is indicated, but not monitored
Test Item
Description
DOOR LOCK
This test is able to check warning chime in combination meter operation. [ALL LOCK/ALL UN-
LOCK/DR UNLOCK/OTHER UNLOCK]
INT LAMP
This test is able to check interior lamp operation [ON/OFF].
FLASHER
This test is able to check flasher operation [LH/RH/OFF].
Work Item
Setting item
Setting
BATTERY SAVER SET
ON*
With the exterior lamp battery saver function
OFF
Without the exterior lamp battery saver function
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-21
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
*: Initial setting
DATA MONITOR
ACTIVE TEST
WIPER
CUSTOM A/LIGHT SET-
TING
MODE1*
Normal
MODE2
More sensitive setting than normal setting (Turns ON earlier than normal operation.)
MODE3
More sensitive setting than MODE 2 (Turns ON earlier than MODE 2.)
MODE4
Less sensitive setting than normal setting (Turns ON later than normal operation.)
ILL DELAY SET
MODE1*
45 sec.
Sets delay timer function timer operation time
(All doors closed)
MODE2
Without the func-
tion
MODE3
30 sec.
MODE4
60 sec.
MODE5
90 sec.
MODE6
120 sec.
MODE7
150 sec.
MODE8
180 sec.
Work Item
Setting item
Setting
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judged from IGN signal (ignition power supply)
HI BEAM SW [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
H/L SW POS [ON/OFF]
LIGHT SW 1ST [ON/OFF]
PASSING SW [ON/OFF]
AUTO LIGHT SW [ON/OFF]
FR FOG SW [ON/OFF]
DOOR SW-DR [ON/OFF]
The switch status input from front door switch LH
AUT LIGHT SYS [ON/OFF]
Auto light system status that BCM judges from the vehicle condition
Test Item
Operation
Description
TAIL LAMP
ON
Transmits the position light request signal to IPDM E/R with CAN com-
munication to turn the tail lamp ON.
OFF
Stops the tail lamp request signal transmission.
HEAD LAMP
HI
Transmits the high beam request signal with CAN communication to turn
the headlamp (HI).
LO
Transmits the low beam request signal with CAN communication to turn
the headlamp (LO).
OFF
Stops the high & low beam request signal transmission.
FR FOG LAMP
ON
Transmits the front fog lights request signal to IPDM E/R with CAN com-
munication to turn the front fog lamp ON.
OFF
Stops the front fog lights request signal transmission.
DAYTIME RUNNING LIGHT
ON
Transmits the day time running light request signal to IPDM E/R with
CAN communication to turn the each lamps ON.
OFF
Stops the day time running light request signal transmission.
BCS-22
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
WIPER : CONSULT-III Function (BCM - WIPER)
INFOID:0000000001712670
WORK SUPPORT
*: Factory setting
DATA MONITOR
ACTIVE TEST
FLASHER
FLASHER : CONSULT-III Function (BCM - FLASHER)
INFOID:0000000001712671
DATA MONITOR
Work Item
Setting
Item
Description
WIPER SPEED
SETTING
ON*
With vehicle speed
(Front wiper intermittent time linked with the vehicle speed and wiper intermittent dial position)
OFF
Without vehicle speed
(Front wiper intermittent time linked with the wiper intermittent dial position)
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch ON status judged from ignition power supply
FR WIPER HI [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
FR WIPER LOW [ON/OFF]
FR WIPER INT [ON/OFF]
FR WASHER SW [ON/OFF]
INT VOLUME [1 - 7]
Each switch status that BCM judges from the combination switch reading function
FR WIPER STOP [ON/OFF]
Front wiper motor (stop position) status received from IPDM E/R with CAN communica-
tion
VEHICLE SPEED [km/h]
The value of the vehicle speed signal received from combination meter with CAN com-
munication
RR WIPER ON [ON/OFF]
Each switch status that BCM judges from the combination switch reading function
RR WIPER INT [ON/OFF]
RR WASHER SW [ON/OFF]
RR WIPER STOP [ON/OFF]
Rear wiper motor (stop position) status input from the rear wiper motor
Test Item
Operation
Description
FR WIPER
HI
Transmits the front wiper request signal (HI) to IPDM E/R with CAN communication to op-
erate the front wiper HI operation.
LO
Transmits the front wiper request signal (LO) to IPDM E/R with CAN communication to
operate the front wiper LO operation.
INT
Transmits the front wiper request signal (INT) to IPDM E/R with CAN communication to
operate the front wiper INT operation.
OFF
Stops transmitting the front wiper request signal to stop the front wiper operation.
RISE UP WIPER
TEST
ON
Outputs the voltage to operate the rear wiper motor.
OFF
Stops the voltage to stop.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-23
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
AIR CONDITIONER
AIR CONDITIONER : CONSULT-III Function (BCM - AUTO AIR CONDITIONER)
INFOID:0000000001712672
DATA MONITOR
INTELLIGENT KEY
INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)
INFOID:0000000001712673
DATA MONITOR
COMB SW
COMB SW : CONSULT-III Function (BCM - COMB SW)
INFOID:0000000001712674
DATA MONITOR
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Ignition switch (ON) status judged from IGN signal (ignition power supply)
HAZARD SW [ON/OFF]
The switch status input from the hazard switch
TURN SIGNAL R [ON/OFF]
Each switch condition that BCM judges from the combination switch reading function
TURN SIGNAL L [ON/OFF]
BRAKE SW [ON/OFF]
The switch status input from the brake switch
Test Item
Operation
Description
FLASHER
RH
Outputs the voltage to turn the right side turn signal lamps ON.
LH
Outputs the voltage to turn the left side turn signal lamps ON.
OFF
Stops the voltage to turn the turn signal lamps OFF.
Monitor Item
[Unit]
Contents
IGN ON SW [ON/OFF]
Display [ignition switch position (On)/(Off), ACC position (Off)] status as judged from ignition
switch signal
FAN ON SIG [ON/OFF]
Display [FAN (On)/FAN (Off)] status as judged form blower fan motor switch signal
AIR COND SW [ON/OFF]
Display [COMP (On)/COMP (Off)] status as judged form air conditioner switch signal
Monitor Item
[Unit]
Condition
PUSH SW [ON/OFF]
Indicates condition of ignition knob switch
I-KEY LOCK [ON/OFF]
Indicates condition of lock signal from Intelligent Key
I-KEY UNLOCK [ON/OFF]
Indicates [condition of unlock signal from Intelligent Key
I-KEY PW DWN [ON/OFF]
Indicates condition of all power window signal from Intelligent Key
I-KEY TRUNK [ON/OFF]
Indicates condition of trunk open signal from Intelligent Key
I-KEY PANIC [ON/OFF]
Indicates condition of panic signal from Intelligent Key
BCS-24
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
IMMU
IMMU : CONSULT-III Function (BCM - IMMU)
INFOID:0000000001712675
DATA MONITOR
ACTIVE TEST
BATTERY SAVER
Monitor Item
[Unit]
Description
TURN SIGNAL R
[OFF/ON]
Displays the status of the TURN RH switch in combination switch judged by BCM with the combination switch
reading function
TURN SIGNAL L
[OFF/ON]
Displays the status of the TURN LH switch in combination switch judged by BCM with the combination switch
reading function
HI BEAM SW
[OFF/ON]
Displays the status of the HI BEAM switch in combination switch judged by BCM with the combination switch
reading function
HEADLAMP SW1
[OFF/ON]
Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination
switch reading function
HEADLAMP SW2
[OFF/ON]
Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination
switch reading function
LIGHT SW 1ST
[OFF/ON]
Displays the status of the HEADLAMP switch in combination switch judged by BCM with the combination
switch reading function
PASSING SW
[OFF/ON]
Displays the status of the PASSING switch in combination switch judged by BCM with the combination switch
reading function
AUTO LIGHT SW
[OFF/ON]
Displays the status of the AUTO LIGHT switch in combination switch judged by BCM with the combination
switch reading function
FR FOG SW
[OFF/ON]
Displays the status of the FR FOG switch in combination switch judged by BCM with the combination switch
reading function
FR WIPER HI
[OFF/ON]
Displays the status of the FR WIPER HI switch in combination switch judged by BCM with the combination
switch reading function
FR WIPER LOW
[OFF/ON]
Displays the status of the FR WIPER LOW switch in combination switch judged by BCM with the combination
switch reading function
FR WIPER INT
[OFF/ON]
Displays the status of the FR WIPER INT switch in combination switch judged by BCM with the combination
switch reading function
FR WASHER SW
[OFF/ON]
Displays the status of the FR WASHER switch in combination switch judged by BCM with the combination
switch reading function
INT VOLUME
[1 - 7]
Displays the status of wiper intermittent dial position judged by BCM with the combination switch reading
function
RR WIPER ON
[OFF/ON]
Displays the status of the RR WIPER switch in combination switch judged by BCM with the combination
switch reading function
RR WIPER INT
[OFF/ON]
Displays the status of the RR WIPER INT switch in combination switch judged by BCM with the combination
switch reading function
RR WASHER SW
[OFF/ON]
Displays the status of the RR WASHER switch in combination switch judged by BCM with the combination
switch reading function
Monitor Item
[Unit]
Description
IGN ON SW [ON/OFF]
Indicates condition of ignition switch in ON position.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [ON/OFF].
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст